Infineon Technologies recently launched the OptiMOS 5 25- and 30-V product family, the next generation of Power MOSFETs in standard discrete packages, a new class of power stages named Power Block, and in an integrated power stage, DrMOS 5×5. Together with Infineon’s driver and digital controller products the company delivers full system solutions for applications such as server, client, datacom or telecom.
The newly introduced OptiMOS family offers benchmark solutions with efficiency improvements of around 1% across the whole load range compared to its previous generation, exceeding 95% peak efficiency in a typical server voltage regulator design. This improved performance is based for example on the reduction of switching losses (Q switch) by 50% compared to the previous OptiMOS technology. Thus, implementing the new OptiMOS 25 V would lead to energy savings of 26.3 kWh per year for a single 130-W server CPU working 365 days.
The launch of the OptiMOS product family is accompanied by the introduction of a new packaging technology offering a further reduction in PCB area consumption. It is used in the Power Block product family and in the integrated powerstage DrMOS 5×5 and offers a source down low-side MOSFET for improved thermal performance, with a reduction by 50% of the thermal resistance in comparison to standard package solution, such as SuperSO8.
Infineon`s Power Block is a leadless SMD package comprising the low-side and high-side MOSFET of a synchronous DC/DC converter into a 5.0 × 6.0 mm 2 package outline. With Power Block, customers can shrink their designs up to 85 percent by replacing two separate discrete packages, such as SuperSO8 or SO-8. Both, the small package outline and the interconnection of the two MOSFETs within the package minimize the loop inductance for best system performance.
OptiMOS 5 25V is also used in an integrated power stage, combining DrMOS 5×5, driver and two MOSFETs, for a total area consumption on the PCB equal to 25mm². The integrated driver plus MOSFETs solution results in a shorter design time and is easy to design-in. Additionally, the dovetailed power stage includes a high accurate temperature sense of +/-5°C (compared to +/-10°C of an external one) which enables higher system reliability and performance.
Samples of the new OptiMOS 25- and 30-V devices in SuperSO8, S3O8 and Power Block packages, with on-state resistances from 0.9 mΩ to 3.3 mΩ are available. Additional products with monolithic integrated Schottky-like diode and products in 30 V will be available from Q2 2015 onwards. DrMOS 5×5 will be released in Q2 2015. Samples are available.
Source: InfineonSponsor this Article