Product News

Encapsulated 80-A Digital Power Module for FPGAs, Processors, & Memory

Intersil Corp. recently announced the industry’s first 80-A fully encapsulated digital DC/DC PMBus power module that provides point-of-load (POL) conversions for advanced FPGAs, DSPs, ASICs, processors, and memory. The ISL8273M is a complete step-down regulated power supply that delivers up to 80-A output current and operates from industry-standard 5- or 12-V input power rails. Multiphase current sharing of up to four ISL8273M power modules enables you to create a 320-A solution with output voltages as low as 0.6 V. The compact (18 mm × 23 mm) ISL8273M provides high power density and performance for increasingly space-constrained data center equipment and wireless communications infrastructure systems.Intersil ISL8273M

The ISL8273M digital power module leverages a patented ChargeMode control architecture that delivers superior efficiencies, with up to 94% peak efficiency and better than 90% efficiency on most conversions. It also provides a single clock cycle fast transient response to output current load steps common in FPGAs and DSPs processing power bursts.

The 80A ISL8273M further distances itself from competitive digital power modules by delivering 2× higher output current. Its proprietary High Density Array (HDA) package offers unmatched electrical and thermal performance through a single-layer conductive package substrate that reduces lead inductance and dissipates heat primarily through the system board.

Key specs and features:

  • 80-A digital switch mode power supply with current sharing, multiphase and multi-modules support for up to 320-A power rails
  • Wide input voltage range from 4.5 to 14 V and programmable Vout from 0.6 to 2.5 V
  • PMBus-enabled solution for full system configuration, telemetry, and monitoring of all conversions and operating parameters
  • Up to 94% peak conversion efficiency with 1% output voltage accuracy
  • Single clock cycle transient response
  • Programmable Vout, soft-start, soft-stop, sequencing, margining and under-voltage, over-voltage, under-current, over-current, under temperature and over-temperature
  • Monitors Vin, Vout, Iout, temperature, duty cycle, switching frequency, power good and faults
  • Internal nonvolatile memory saves module configuration parameters and fault logging
  • Compact, thermally-enhanced high density array (HDA) package simplifies thermal management, solution positioning and PCB routing

The ISL8273M, available now in a thermally enhanced 18 mm × 23 mm × 7.5 mm HDA package, costs $69 in 1,000-piece quantities. The ISL8273MEVAL1Z 80A digital module evaluation board is available to speed time-to-market and priced at $89.

Source: Intersil Corp.

Keep up-to-date with our FREE Weekly Newsletter!

Don't miss out on upcoming issues of Circuit Cellar.

Note: We’ve made the Dec 2022 issue of Circuit Cellar available as a free sample issue. In it, you’ll find a rich variety of the kinds of articles and information that exemplify a typical issue of the current magazine.

Would you like to write for Circuit Cellar? We are always accepting articles/posts from the technical community. Get in touch with us and let's discuss your ideas.

Sponsor this Article
Website | + posts

Circuit Cellar's editorial team comprises professional engineers, technical editors, and digital media specialists. You can reach the Editorial Department at, @circuitcellar, and

Supporting Companies

Upcoming Events

Copyright © KCK Media Corp.
All Rights Reserved

Copyright © 2024 KCK Media Corp.

Encapsulated 80-A Digital Power Module for FPGAs, Processors, �…

by Circuit Cellar Staff time to read: 1 min