Class I and II 500 W Configurable Medical Power Supplies

TDK has announced the XMS500 series of AC-DC power supplies, rated at 500 W output power, with a Class I and Class II (no earth ground connection) construction. The series conforms to curve B conducted and radiated emissions, with a 6 dB margin and has a low leakage current of less than 150 µA. The high operating efficiency and mechanical design enables the XMS500 to operate at full load with airflow rates of just 1 m/s, reducing audible noise. Applications include home healthcare, hospital, imaging and clinical diagnostic systems in addition to industrial, test and measurement and communications equipment.

xms500-pr-nov17-whiteDesigned as a configurable product, engineers can select from multiple standard options, to optimize both system performance and cost, without incurring development charges or minimum purchase quantities. The options include case styles (including an internal low speed fan), a choice of standby voltage, a 12 V fixed or variable speed fan supply, remote on/off, AC fail and single or dual input fuses. 12 V, 24 V, 3 6V or 48 V nominal outputs are offered, with other voltages upon request.

The XMS500 accepts a 90 VAC to 264 VAC input, withstanding 300Vac for five seconds and can operate in ambient temperatures of up to +70°C, derating linearly above 50°C by 2.5% per °C. The open frame version measures 102 mm x 180 mm x 37 mm and the U-channel 107 mm x 180 mm x 39.5 mm. The low profile allows installation in systems where space is limited.

All models are certified to IEC/EN/UL/CSA 60601-1 and IEC/EN/UL/CSA 60950-1 with CE marking for the Low Voltage, EMC and RoHS2 Directives. The series is compliant to EN 55011-B, EN 55032-B conducted and radiated emissions (for both Class I and II), EN 61000-3-2 harmonics, IEC 60601-1-2 Edition 4, and IEC 61000-4 immunity standards.

Input to output isolation is 4,000 VAC (2 x MoPP), input to ground isolation 1,500 VAC (1 x MoPP) and output to ground isolation is 1,500 VAC (1 x MoPP) for suitability in B and BF rated equipment.

TDK-Lambda Americas | www.us.tdk-lambda.com

Ultra Wide Input Range Power Converters

Aimtec has announced the release of two new series of regulated AC to DC power converters, the AME10-BJZ and AME20-BJZ. These new series will expedite and simplify industrial and commercial product design in a low cost solution. The new regulated 10 W and 20 W AME10-BJZ and AME20-BJZ series are packaged in industry standard packages: 62.0 x 45.0 x 30.0 mm (2.44 x 1.77 x 1.18 inches) and 70.00 x 48.00 x 30.0 mm (2.76 x 1.89 x 1.18 inches) respectively. They meet the IEC/EN 62368-1 standards and are EN55032 class B compliant.

200_sq_ame10-bjz-press-jpg-94f2The internal EMC filtering reduces the need for external filtering components reducing production costs and are well suited for a wide range of applications including electric metering of three phase AC supply, industrial applications as well as commercial equipment applications. The standard package is available with 3.3, 5, 9, 12, 15 and 24 VDC outputs. These series offer over current, over voltage and short circuit protection while accepting an ultra-wide input range of 90-528 VAC or 100-745 VDC at 47-63 Hz input frequency. This series offers a high MTBF of 300,000 hours with an efficiency of up to 83%. The new AME10-BJZ and AME20-BJZ series feature high input/output isolation of 4,000 VAC and operate from a bone chilling -40°C to a blistering +70°C with full power output from -10°C to +55°C.

Aimtec | www.aimtec.com