Sponsor an Article

Article Sponsorship is for the life of the article — $750 per article.
When you sponsor an article:
• You can replace the sidebar advertising with your own.
• The text inline advertising is removed.
• The article is moved out of restricted content (ie will be free to all)
Get more details

Submit the form below to make an Article sponsorship request – sponsorship acceptance is at the discretion of the publisher. Once approved you will be emailed payment details.

You are sponsoring
Figure 8 This is the display and the unit's circuit board. The Teensy 3.5's uSD socket has a flex extension cable plugged into it to extend the socket so it can be accessed from the outside of the unit's enclosure. The cable here is much longer than needed—about 18”—but my first choice of a shorter cable was defective when it arrived.

A Potentiostat for Performing Electrochemical Experiments

The powerful Teensy 3.5 microcontroller (MCU) module, combined with a Bridgetek-controlled thin-film transistor (TFT) touchscreen display and some analog components, makes for a low-cost Potentiostat instrument. Over the years I’ve designed and built a number of different potentiostats to be used mainly for teaching labs, as well as a few specialized ones for researchers at […]
Keep up-to-date with our FREE Weekly Newsletter!

Don't miss out on upcoming issues of Circuit Cellar.

Note: We’ve made the Dec 2022 issue of Circuit Cellar available as a free sample issue. In it, you’ll find a rich variety of the kinds of articles and information that exemplify a typical issue of the current magazine.

Would you like to write for Circuit Cellar? We are always accepting articles/posts from the technical community. Get in touch with us and let's discuss your ideas.

Supporting Companies

Upcoming Events

Copyright © KCK Media Corp.
All Rights Reserved

Copyright © 2024 KCK Media Corp.