CC Blog • Projects • Research & Design Hub

A 5-DOF Robotic Manipulator

Design and Development of a Robot Arm Using ESP32-Based Control and Flutter Interface

The design and development of a 5-degrees-of-freedom (DOF) 3D-printed robotic arm, powered by servo motors, and controlled through an ESP32 microcontroller can teach critical lessons—and be a lot of fun! Maheshwaran’s article covers the complete workflow—from mechanical design and 3D printing to circuit integration, firmware development, and mobile app control.


  • How can an ESP32 control a 5-DOF robotic arm using servo motors?
  • How do MG996 and MG90 servos support different robotic arm joints?
  • How can a Flutter app control a robotic arm over Wi-Fi?
  • How can FreeCAD and 3D printing be used to build a robotic manipulator?
  • How do power regulation and PCB wiring support reliable servo control?
  • ESP32-WROOM-32 DevKit
  • Tower Pro MG996R Servo
  • Tower Pro MG90 Servo
  • XL4015 Buck Converter
  • Flutter
  • FreeCAD
  • Arduino IDE
  • TCP/IP
  • Wi-Fi Access Point Mode
  • PWM
  • PETG Filament
  • Anycubic Kobra 2 Neo
  • Anycubic |
    store.anycubic.com
  • Arduino |
    arduino.cc
  • Espressif Systems |
    espressif.com
  • Flutter |
    flutter.dev
  • FreeCAD |
    freecad.org
  • JacobsParts |
    jacobsparts.com
  • Microsoft Visual Studio Code |
    code.visualstudio.com
  • Tower Pro |
    towerpro.com.tw

Building a functional robotic arm is a dream for many students and robotics enthusiasts. This project presents the design and development of a 5-degrees-of-freedom (DOF) 3D-printed robotic arm, shown in Figure 1, powered by servo motors and controlled through an ESP32 microcontroller. The system integrates seamlessly with a Flutter-based smartphone application, enabling wireless control and motion sequencing.

Figure 1
5-DOF 3D-printed robotic manipulator with Flutter UI.
Figure 1
5-DOF 3D-printed robotic manipulator with Flutter UI.

I wanted the project to emphasize affordability, accessibility, and educational value, so builders can explore core concepts in mechanics, electronics, and embedded systems without relying on expensive industrial hardware.

The ESP32 handles real-time servo control and communication over Wi-Fi, while the custom Flutter app provides a user-friendly interface for manipulating joint angles and executing preprogrammed movements.

This robotic arm serves as a practical platform for experimenting with topics such as inverse kinematics, automation, and IoT-based robotics. The article will cover the complete workflow—from mechanical design and 3D printing to circuit integration, firmware development, and mobile app control—making it an ideal hands-on guide for hobbyists, educators, and makers seeking to build their own smart robotic systems.

The Big Picture

The robotic arm system integrates multiple disciplines—mechanical design, embedded control, and wireless communication—into a compact, educational platform. The overall functional flow is shown in Figure 2.

Figure 2
System block fiagram of the 5-DOF robotic arm.
Figure 2
System block fiagram of the 5-DOF robotic arm.

The system begins with a 12V DC lithium-ion power pack, which feeds both the ESP32 controller and the servo motors through a regulated 5V buck converter. The ESP32 handles control logic, while a Flutter-based mobile application running on a smartphone provides wireless command input over Wi-Fi. Each block in this system performs a specific role, as described here:

12V DC Power Supply—The primary energy source for the robotic arm is a 12V lithium-ion battery pack built from 18650 cells in a 3S configuration with a 3S battery management system (BMS). This pack supplies up to 10A of continuous current, enough to drive multiple servo motors under load.

Using a portable battery eliminates dependency on wall adapters, making the system mobile and safe for classroom or demonstration use. Voltage stability from the BMS ensures that servo torque and response remain consistent during operation.

12V to 5V Buck Converter—The XL4015 buck converter shown in Figure 3 steps down the 12V input to a regulated 5V output. It powers both the ESP32 Dev Kit and all servo motors. This converter was selected for its 5A continuous current rating and built-in aluminum heatsink, ensuring reliability under continuous servo motion.

Figure 3
XL4015 buck converter 12V to 5V.
Figure 3
XL4015 buck converter 12V to 5V.

The XL4015’s efficiency and onboard capacitive filtering also minimize voltage dips that could cause controller resets during high-load transitions. In this configuration, the ESP32 and servos share a common ground to maintain signal integrity for PWM control.

ESP32 DevKit—The ESP32-WROOM-32 DevKit shown in Figure 4 serves as the brain of the robotic arm, controlling servo movement and managing wireless communication. It generates pulse-width modulation (PWM) signals on dedicated GPIO pins to control each servo motor’s position.

Figure 4
ESP32-WROOM-32 DevKit.
Figure 4
ESP32-WROOM-32 DevKit.

The ESP32 receives position commands from the Flutter smartphone app through Wi-Fi. Based on the command received, it calculates the desired servo angles and updates their PWM values in real time.

Its dual-core processor allows it to handle communication and servo control tasks concurrently. One core is typically dedicated to Wi-Fi communication while the other manages real-time servo movement, ensuring smooth and responsive motion.

Servo Motor Selection

Each joint in the robotic arm is actuated using RC servo motors, which provide precise angular positioning through PWM control. For this project, two types of servos were carefully selected based on their torque, size, gear material, and reliability—the MG996 and the MG90 micro servo.

MG996 Servo Motor (Base, Shoulder, Elbow)—The MG996R (or MG995 equivalent) shown in Figure 5 is employed in the base rotation, shoulder, and elbow joints, where higher torque is essential to support the arm structure and payload. This servo offers high torque output (~9kg cm to 11kg·cm at 6V) and is driven by a coreless DC motor coupled to metal gears, providing both strength and smooth motion under continuous load.

Figure 5
MG996 servo motor.
Figure 5
MG996 servo motor.

The primary reasons for choosing the MG996 servo are:

  • High Torque Capability: Adequate to lift and move multiple linkages simultaneously.
  • Metal Gear Train: Offers greater durability and wear resistance than plastic gears, especially under high-load conditions.
  • Standard Size and Easy Mounting: Compatible with standard servo brackets and horns, simplifying mechanical integration.
  • PWM Control Compatibility: Easily driven by the ESP32’s 5V PWM signals without additional driver circuitry.

Because of its widespread popularity, many low-cost cloned versions are available on the market that use substandard gears or motors. To ensure reliable performance and consistent torque, only original Tower Pro MG996R servos were selected for this project.

MG90 Micro Servo Motor (Wrist, Forearm, Gripper)—For the wrist joint, Forearm joint and gripper end effector, the MG90 micro servo shown in Figure 6 was chosen due to its compact size, lower power consumption, and sufficient torque (2kg·cm to 2.5kg·cm) for lightweight motion control.

Figure 6
MG90 micro servo motor.
Figure 6
MG90 micro servo motor.

My reasons for selecting the MG90 are:

  • Metal Gear Design: Provides increased strength and precision compared to standard SG90 plastic gear servos.
  • Lightweight and Compact: Ideal for distal joints where weight reduction is crucial for smoother motion and stability.
  • High Responsiveness: Offers quick angular movement suitable for small-range actuation such as gripping or wrist bending.
  • Wide Availability and Compatibility: Can be directly controlled by the ESP32 using standard PWM signals.

Just as with the MG996, only genuine Tower Pro MG90 servos were used to ensure smooth operation and avoid jitter or backlash commonly found in cloned variants.

Joints and Links

The robotic arm’s mechanical structure—including all the joints and connecting links—is 3D-printed from PETG filament, chosen for its combination of strength, impact resistance, and thermal stability. The arm provides 5-DOF plus an additional gripper actuation, as listed below:

  1. Base rotation
  2. Shoulder
  3. Elbow
  4. Forearm
  5. Wrist
  6. Gripper (End effector)

Each servo motor is mounted using the original screws supplied with the servo units, ensuring proper fit and alignment without additional hardware. For the end-effector and gripper linkage connections, SS304 M3 Allen-head bolts and nuts are used to provide mechanical rigidity and smooth pivot movement.

The structure follows a modular and lightweight design, allowing easy assembly and part replacement. This flexibility enables students and robotics enthusiasts to experiment with different link lengths, servo placements, or mechanical configurations while maintaining overall stability and precision.

Wi-Fi Communication

The ESP32’s built-in Wi-Fi transceiver provides a reliable and high-speed communication link between the robotic arm and the smartphone control application. All control commands are transmitted in a simple string format over a TCP/IP socket connection, ensuring minimal latency and smooth, real-time control of the servo movements.

In this project, the ESP32 operates exclusively in Access Point (AP) mode, creating its own Wi-Fi network. The smartphone connects directly to this network without requiring an external router or Internet connectivity. This setup makes the system fully portable and independent, allowing it to function anywhere—even in classrooms, workshops, or outdoor environments.

Wi-Fi was chosen instead of Bluetooth because it offers a longer communication range, lower latency, and higher data stability during continuous operation. By maintaining a direct TCP link between the smartphone and the ESP32, the system ensures that motion commands are executed immediately and reliably.

This standalone AP-based communication method also simplifies the setup process—users only need to power on the robotic arm, connect their phone to the ESP32’s Wi-Fi SSID, and launch the mobile app to start controlling the arm instantly.

Flutter Mobile Application

To provide an intuitive and real-time control interface, a mobile application was developed using Flutter, Google’s cross-platform UI framework. The app enables users to control the 5-DOF robotic manipulator directly from their smartphone through Wi-Fi communication with the ESP32 controller.

The application allows both manual and predefined motion control. In manual mode, users can adjust individual joint angles through on-screen sliders or buttons, sending commands in JSON format to the ESP32 over a TCP/IP connection. In sequence mode, predefined movements or tasks can be executed automatically, providing a simplified way to demonstrate coordinated motion.

The user interface is designed with simplicity in mind—featuring clearly labeled control elements for each joint (base, shoulder, elbow, forearm, wrist, and gripper). Real-time feedback ensures that every control input is reflected in the robotic arm’s movement almost instantly.

Currently, the application is available for Android devices, but since it is built using Flutter, developers or students replicating this project can easily adapt the same source code for iOS platforms as well. This mobile app provides a lightweight and practical companion to the hardware, enabling wireless operation and hands-on experimentation without the need for a physical joystick or PC interface.

Electronics and Control

Figure 7 shows the complete schematic diagram of the robotic arm control system. A double-sided dotted PCB board was used as the base for assembling all electronic components. This type of board is ideal for prototyping, offering flexibility in layout, ease of soldering, and mechanical strength for securely mounting modules.

Figure 7
Schematic diagram of the robotic arm’s control system.
Figure 7
Schematic diagram of the robotic arm’s control system.

The ESP32-WROOM-32 DevKit module is mounted using two 15-pin female Bergstik headers, soldered directly onto the PCB. This arrangement provides a firm yet removable connection, making firmware updates and module replacement convenient during testing.

To interface the servo motors, six 3-pin male Bergstik headers were soldered on the PCB, corresponding to each joint (base, shoulder, elbow, forearm, wrist, and gripper). These headers provide clean connections for signal (PWM), power (5V), and ground lines.

A 2-pin JST female connector is used for the main 5V power input, supplied by the XL4015 buck converter. The converter steps down the 12V DC from the Li-ion battery pack to 5V, capable of delivering up to 5A with an onboard heatsink for thermal management.

All module interconnections—such as power, control, and communication lines—are made using insulated jumper wires, ensuring compact and reliable routing. This modular wiring method simplifies troubleshooting and allows easy individual component changes.

Overall, the assembled control board provides a robust, portable, and maintainable hardware platform for driving all servo joints, making it ideal for educational and experimental robotic applications.

PCB Assembly and Wiring Connections

Now, it’s time to assemble the electronic control board by connecting headers, connectors, and modules. Follow these steps carefully to ensure reliable operation and easy maintenance:

1. Solder ESP32 Bergstik Headers

a. Place and solder two 15-pin female Bergstik headers on the dotted PCB to fit the ESP32-WROOM-32 DevKit.

b. Ensure both headers are perfectly aligned before soldering.

c. After soldering, insert the ESP32 board to verify correct spacing and alignment.

2. Solder Servo Motor Headers

a. Solder six 3-pin male Bergstik headers on the PCB—each corresponding to one servo motor (base, shoulder, elbow, forearm, wrist, and gripper).

— ADVERTISMENT—

—Advertise Here—

b. Label the headers clearly for easy identification.

c. The pin configuration for each header should be:

Pin 1 → PWM signal (connected to assigned ESP32 GPIO pin)

Pin 2 → +5V (from XL4015 buck converter output)

Pin 3 → GND (common ground with ESP32)

This setup provides a compact interface for servo plug-in connections.

3. Solder Power Input Connector (JST 2-Pin Female)

a. Solder a 2-pin JST female connector to the PCB for the main 5V power input.

b. Wire connections:

Pin 1 → +5V from XL4015 buck converter

Pin 2 → GND (common ground)

This connector supplies power to both the ESP32 and all servos.

4. Connect XL4015 Buck Converter and Control Unit

In this project, the XL4015 buck converter is not mounted directly on the PCB. Instead, both the ESP32 control circuit and the buck converter module are securely attached on top of the battery enclosure using double-sided adhesive pads, ensuring compact placement and easy access for wiring.

A 12V DC female jack is connected to the battery pack output, while a matching male jack is used to connect power input to the buck converter. This detachable connection simplifies maintenance and battery replacement.

The buck converter’s output is connected to the ESP32 control circuit through a 2-pin JST connector, providing a clean and modular interface. The final wiring connections are:

IN+ → +12V from the Li-ion battery pack

IN− → Battery GND

OUT+ → +5V (via 2-pin JST to ESP32 circuit)

OUT− → Common GND line

This configuration allows the XL4015 to efficiently regulate the 12V DC battery voltage down to a stable 5V, powering both the ESP32 DevKit and the servo motors. The arrangement ensures proper heat dissipation from the converter’s heatsink while maintaining a neat, serviceable layout. The complete setup is illustrated in Figure 8.

— ADVERTISMENT—

—Advertise Here—

Figure 8
Robotic Arm Power and Control Unit
Figure 8
Robotic Arm Power and Control Unit
3D Printed Parts

For this project, all mechanical parts of the robotic arm were designed and developed using FreeCAD, an open-source 3D CAD software that allows precise dimensioning, tolerance control, and parametric design. The entire structure—including all joints, links, base, and gripper assembly—was 3D printed using PETG filament, chosen for its excellent balance of strength, thermal stability, and layer adhesion compared to PLA, making it suitable for continuous operation of servo-driven mechanisms.

Each printed part shown in Figure 9 was optimized for strength-to-weight ratio using 40% infill and 0.2mm layer height, ensuring smooth surface finish and minimal backlash in the mechanical joints. The links and joints are assembled with SS304 M3 Allen bolts and nuts, ensuring secure, repeatable connections.

Figure 9
Shoulder Link (a). Elbow Link (b). Shoulder Joint (c). Base Housing (d). Wrist Joint (e). Gripper arm (f). Gripper Link (g). Forearm Joint (h). Gripper Right Gear Arm (i). Gripper Left Gear Arm (j).
Figure 9
Shoulder Link (a). Elbow Link (b). Shoulder Joint (c). Base Housing (d). Wrist Joint (e). Gripper arm (f). Gripper Link (g). Forearm Joint (h). Gripper Right Gear Arm (i). Gripper Left Gear Arm (j).

This modular 3D-printed construction makes the robotic arm lightweight, cost-effective, and easily customizable for educational, research, or prototype development purposes. Individual parts can be reprinted and replaced independently, simplifying maintenance and future design upgrades.

3D Printing Parameters

All parts of the robotic arm were fabricated using an Anycubic Kobra 2 Neo 3D printer with 1.75mm PETG filament. The printer’s direct-drive extruder and automatic bed leveling provided excellent dimensional accuracy and layer consistency, making it suitable for producing precise mechanical components.

To achieve the required mechanical strength and surface finish, optimized parameters were used during fabrication. The layer height was set to 0.2mm to balance detail and print time, with three perimeters (wall line count) to improve rigidity at servo mounting points.

An infill density of 35% to 40% with a gyroid pattern provided lightweight yet durable parts. The nozzle temperature was maintained at 245°C, and the bed temperature at 80°C to ensure strong layer bonding and minimize warping—especially for larger components such as the base and shoulder link.

The print speed was set to 60mm/s, which the Kobra 2 Neo handles comfortably without compromising quality. Retraction was tuned to 1.2mm at 30mm/s to prevent stringing typical with PETG.

The cooling fan operated at 50% to 60%, balancing part cooling with proper layer adhesion. Supports were enabled only for overhangs (touching the build plate), primarily for the wrist and gripper parts, and a 5mm–8mm brim was added to improve bed adhesion.

Before printing, the filament was pre-dried at 65°C for three hours to eliminate moisture absorption, ensuring smooth and bubble-free extrusion. Each part was oriented to align layer lines along the main stress direction, particularly in the shoulder, elbow, and forearm links, to enhance strength under servo torque loads.

These optimized settings provided mechanically strong, dimensionally accurate, and visually clean parts, making the overall assembly both reliable and professional in appearance and quality.

Assembly Procedure

After 3D printing all the structural components, the robotic arm can be assembled using basic tools such as an M3 Allen key, screwdriver, and pliers. Download all 3D STL files provided with this article and print the parts using a 3D printer. Ensure that the gripper arms are printed in two copies and the gripper links in four copies to complete the end-effector assembly.

The detailed assembly steps are as follows:

Base Assembly

  1. Mount the MG996 servo motor onto the base housing using SS304 M3 Allen bolts as shown in Figure 10.
  2. Tighten the bolts with an M3 Allen key to ensure firm mounting.
  3. Fix the servo horn onto the MG996 shaft and secure it using the supplied screw.
  4. Attach the shoulder joint on top of the base housing using screws.
  5. This forms the foundation of the arm, enabling smooth base rotation.
Figure 10
MG996 servo motor mounted on the base housing.
Figure 10
MG996 servo motor mounted on the base housing.

Shoulder Assembly

  1. Mount another MG996 servo motor onto the shoulder joint using Allen bolts, as shown in Figure 11.
  2. Attach the shoulder link to the servo horn using servo screws, as shown in Figure 12.
  3. Fix another servo horn to the opposite end of the shoulder link using screws.
  4. Ensure the alignment between the shoulder servo and link is accurate, to prevent binding during motion.
Figure 11
MG996 servo motor mounted on the shoulder joint.
Figure 11
MG996 servo motor mounted on the shoulder joint.
Figure 12
Servo horn mounted on the shoulder link.
Figure 12
Servo horn mounted on the shoulder link.

Elbow Assembly

— ADVERTISMENT—

—Advertise Here—

  1. Mount the third MG996 servo motor on the elbow link using Allen bolts.
  2. Fix the elbow link to the shoulder link’s servo horn using the original servo screws.
  3. On the opposite side of the elbow link, mount an MG90 micro servo motor to control the forearm movement.
  4. Attach the MG90 servo horn to the forearm joint and secure it with a screw.

Forearm Assembly

  1. Connect the forearm joint to the elbow link.
  2. Mount another MG90 servo on the forearm joint using screws.
  3. Attach the servo horn to the wrist joint, then fix the wrist joint to the forearm assembly.

Wrist and Gripper Assembly

  1. Mount the next MG90 servo motor to the wrist joint for pitch control.
  2. Assemble the gripper end effector using two gripper arms and four gripper links.
  3. Fix the final MG90 servo motor inside the gripper housing to actuate the open-close motion.
  4. Connect the gripper fingers using M3 Allen bolts and nuts, as shown in Figure 13, allowing free motion and easy maintenance.
  5. Ensure all servos are centered before attaching servo horns to maintain correct initial positions.
Figure 13
A complete setup 5-DOF 3D-printed robotic arm controlled via ESP32.
Figure 13
A complete setup 5-DOF 3D-printed robotic arm controlled via ESP32.
Wiring and Cable Management

To ensure neat and reliable connections between the control circuit and servo motors, the servo wires were extended using high-quality 26AWG stranded wires. Each joint’s cable was color-coded for easy identification during assembly and troubleshooting. The extended wires were routed carefully through the robotic arm structure to avoid tangling or strain during movement.

For improved aesthetics and protection, all wiring was bundled using a spiral sleeve, as shown in Figure 14, which keeps the cables organized, reduces wear from friction, and enhances the overall durability of the system. This cable management approach provides a professional finish and ensures long-term stability of electrical connections during continuous operation.

Figure 14
A complete setup of the 5-DOF 3D-printed robotic arm controlled via ESP32.
Figure 14
A complete setup of the 5-DOF 3D-printed robotic arm controlled via ESP32.

Before powering up the system verify that all GND lines (ESP32, buck converter, servo power, and battery) are common. Check for short circuits between 5V and GND.

Power on the board and confirm 5V regulated output from the XL4015 before connecting the servos or ESP32.

This configuration ensures a stable, easily maintainable, and modular power system for the robotic arm, reducing clutter and improving field serviceability.

The Firmware

The firmware for the robotic arm was developed using the Arduino IDE. The program initializes all necessary peripherals, including PWM channels for servo control, Wi-Fi communication, and a TCP server for data exchange with the smartphone application.

Upon startup, the ESP32 initializes the serial interface for debugging and configures six PWM outputs corresponding to each servo motor—base, shoulder, elbow, forearm, wrist, and gripper. Each servo is assigned to a specific GPIO pin, and initial neutral positions are defined to prevent sudden or unsafe movements during power-up.

After peripheral setup, the ESP32 configures its Wi-Fi module in AP mode. In this mode, the ESP32 creates its own Wi-Fi network, allowing the smartphone to connect directly without requiring any external router or internet connection. The SSID and password of this network are predefined in the source code.

Once the smartphone is connected to the ESP32 network, the firmware runs a TCP server that continuously listens for incoming control commands from the Flutter mobile app. Commands are sent in string format, decoded, and converted into corresponding servo angle values. The ESP32 then generates PWM signals to precisely position each servo motor based on the received data.

The system operates in a continuous loop, maintaining real-time, low-latency communication between the app and the robotic arm. This direct AP approach ensures reliable operation even in environments without Internet connectivity, making it ideal for classroom demonstrations and field use.

The firmware design emphasizes simplicity, modularity, and responsiveness, allowing users to modify servo configurations, communication methods, or add new functionalities such as motion recording or gesture control in future versions.

A Once and Future Robotic Arm

This project will walk you through the design and development of a 5-DOF 3D-printed robotic manipulator powered by an ESP32 controller and servo-based actuation system, fully controlled via a custom Flutter mobile application. The arm offers wireless control through Wi-Fi in mode, providing a smooth, real-time interface for motion control without requiring any external router or PC connection.

The system’s modular design, open-source firmware, and low-cost fabrication make it an excellent educational platform for students, hobbyists, and researchers who want to explore robotics, embedded systems, and control theory. With a payload capacity of up to 100 grams, the arm is suitable for light pick-and-place tasks, basic automation experiments, and robotics learning environments.

Beyond standalone mobile app control, the project also provides a foundation for future expansion into more advanced robotics frameworks. The ESP32 platform supports serial and network-based communication with Robot Operating System (ROS), enabling potential integration with ROS or ROS2 for advanced features such as motion planning, kinematics simulation, and digital twin synchronization.

In future work, this robotic arm can be interfaced with ROS and Gazebo simulation, allowing users to visualize, simulate, and control the physical arm through a virtual environment—bridging the gap between academic study and practical robotics experimentation.

RESOURCES
Anycubic | store.anycubic.com
Arduino | Arduino.cc
Espressif Systems | espressif.com
Flutter | flutter.dev
FreeCAD | freecad.org
JacobsParts | jacobsparts.com
Microsoft Virtual Studio (VS) Code | code.visualstudio.com
Tower Pro | towerpro.com.tw

REFERENCES
[1] https://www.espressif.com/en/products/socs/esp32
[2] https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
[3] https://docs.flutter.dev/deployment/android
[4] https://www.elecrow.com/download/XL4015_datasheet.pdf?srsltid=AfmBOopF6deFw8AkOsddtM5pL-TIGo5LWjKyLDhxpptDvV6GazgOvMd6
[5] https://www.electronicoscaldas.com/datasheet/MG996R_Tower-Pro.pdf?srsltid=AfmBOoputEThnKTWhtHdI1TXIdYMPmytkOM-T7dh2261_VQNfiMddMU8
[6] https://www.electronicoscaldas.com/datasheet/MG90S_Tower-Pro.pdf?srsltid=AfmBOopJ_Yn7Aywx6woPQuVNjVYvm2dhJ0EkdRcqLGBDZ-2738HUYsCG

PUBLISHED IN CIRCUIT CELLAR MAGAZINE • JULY 2026 #432 – Get a PDF of the issue

Keep up-to-date with our FREE Weekly Newsletter!

Don't miss out on upcoming issues of Circuit Cellar.


Note: We’ve made the Dec 2022 issue of Circuit Cellar available as a free sample issue. In it, you’ll find a rich variety of the kinds of articles and information that exemplify a typical issue of the current magazine.

Would you like to write for Circuit Cellar? We are always accepting articles/posts from the technical community. Get in touch with us and let's discuss your ideas.

Sponsor this Article

Supporting Companies

Upcoming Events


Copyright © KCK Media Corp.
All Rights Reserved

Copyright © 2026 KCK Media Corp.

A 5-DOF Robotic Manipulator

by Maheshwaran Sadasivam time to read: 17 min