Insights • Tech The Future

Inside the Tech: E-Bikes Explained

Figure 1 An e-bike build requires components from a wide variety of suppliers.
Written by Wessel Snoey 

  • What electronic systems power a modern e-bike?
  • How do battery management and DC/DC conversion work in e-bikes?
  • What role do sensors and controllers play in ride performance?
  • How do connectivity features enable smart and trackable e-bikes?
  • Why are components like connectors and displays critical to reliability?
  • Battery Management Systems (BMS)
  • FPGAs
  • DC/DC converters
  • Microcontrollers (MCUs)
  • MOSFETs
  • Hall effect sensors
  • IMU sensors
  • LTE
  • GNSS
  • TFT displays
  • NFC/RFID
  • DEGSON | degson.com
  • FSP Technology Inc. | fsp-group.com
  • Gowin Semiconductor Corp. | gowinsemi.com
  • MaxLinear | maxlinear.com
  • Ambiq | ambiq.com
  • Goford Semiconductor Co., Ltd. | gofordsemi.com
  • Ceva, Inc. | ceva-ip.com
  • Quectel | quectel.com
  • Summit Electronics | summitelec.com
  • Lincoln Technology Solutions | lincolntechsolutions.com
  • Goermicro | goermicro.com
  • Cirrus Logic | cirrus.com
  • ELATEC, Inc. | elatec.com
  • Allegion | allegion.com
  • TOP-electronics | top-electronics.com

When you ride an e-bike it feels simple. You just pedal and the bike does the rest. But what does the bike really do, and what systems are running while you’re biking?

Let’s take a closer look at the electronics inside an e-bike and how the right supply-chain partner can support your development. As indicated in Figure 1, the e-bike that seems so simple is often made up of components from a large ecosystem of individual, specialized suppliers.

Figure 1
An e-bike build requires components from a wide variety of suppliers.
Figure 1
An e-bike build requires components from a wide variety of suppliers.
Power and Charging 

Before any ride, you need to charge your e-bike. The first part of that process is the charging connection. DEGSON provides EV-grade charging connectors and cable assemblies built for outdoor use, repeated plugging, and mechanical stress. These ensure a safe and reliable connection between the charger and the bike.

Of course not just the connector is important, FSP Technology Inc. has a wide range of ready to go E-bike / EV chargers available. They make sure your bike is charging reliably and quickly! 

Once the bike is plugged in, the Battery Management System (BMS) wakes up. The BMS manages each cell, ensures the battery charges safely, and monitors temperature to prevent damage. Inside many BMS designs, you will find Gowin Semiconductor Corp. FPGAs, which handle fast and predictable operations such as cell balancing, protection logic, and charging sequences. FPGAs are ideal here because they react instantly and process multiple tasks in parallel. 

After charging, the battery becomes the bike’s main power source. But the battery voltage cannot be used directly by most electronics. This is where MaxLinear DC/DC or buck converters come in. They convert the high battery voltage into stable low-voltage rails that power the controller, sensors, wireless modules, and user interface.

Processing and Motor Control 

Once stable low-voltage rails are available, the bike’s intelligence comes online. This is where the system decides how much support you get, when the motor engages, and how it should respond to your pedaling.

The main controller is usually built around a low-power MCU. Ambiq provides Apollo 5x SoCs that run extremely efficiently, being able to control the whole bike. This matters because the controller stays active throughout the ride, processing sensor data and adjusting motor output without wasting battery.

Some tasks require even faster, deterministic timing. This is where FPGAs are also used. They manage the real-time motor control loops that make the assist feel smooth, consistent, and safe. An FPGA reacts instantly, which is essential for torque calculations, protection checks, emergency cutoffs, and commutation timing. 

High-efficiency power switching is also critical for both motor control and battery safety. Goford Semiconductor Co., Ltd. provides MOSFETs with low Rds(on) and fast switching performance. They are ideal for the motor inverter stage, as well as for BMS protection circuits and DC/DC converters. These MOSFETs help improve range, reliability, and thermal performance. 

With clean power, intelligent control, and efficient motor switching, the bike is officially “awake” and ready to respond.

Sensors and Sensing 

With the controller ready to make decisions, the e-bike needs real-time information about what is happening. Without sensors, the bike would have no awareness of speed, pedaling force, or external conditions. The Ceva, Inc. BNO08x series is one of the most common motion sensors used in e-bikes. It detects tilt, vibration, acceleration, braking, and impacts. This supports ride stability, assist control, and anti-theft protection. 

For wheel speed, Hall effect sensors measure rotation inside the motor or near the wheel. This data goes directly to the controller so it can adjust the pedal assist in real time. Temperature sensors monitor the motor and battery. If heat rises too high, the controller reduces power or shuts the system down to prevent damage. 

An Ambiq RTC (Real Time Clock) handles timekeeping for logs, ride data, and low-power sleep modes. Together, these sensors give the bike environmental awareness and the ability to respond intelligently.

Connectivity and Communication 

Modern e-bikes are becoming connected vehicles. They communicate with apps, fleet systems, and the cloud. This is where Quectel provides LTE, LPWAN, and GNSS modules. These enable live tracking, remote locking, diagnostics, firmware updates, and ride statistics. 

Reliable connectivity also requires a reliable antenna. Bikes vibrate, flex, and include metal parts that challenge radio performance. Summit Electronics offers compact LTE antennas and GNSS antennas designed for rugged mounting conditions. 

Together, the wireless module and antenna give the bike its smart, connected layer.

User Interface

The user interface, such as the one shown in Figure 2, is the part the rider actually sees and touches. This is where electronics meet the real world: gloves, rain, sunlight, and vibration. 

Figure 2: The user interface may be small, but it defines how the rider experiences the entire bike.
Figure 2: The user interface may be small, but it defines how the rider experiences the entire bike.

Most e-bikes use a TFT display to show speed, battery level, assist mode, and warnings. Lincoln Technology Solutions delivers premium sunlight-readable TFT displays with ultra-high brightness (up to 5000+ nits), anti-glare coatings, and rugged durability for outdoor environments. These displays ensure clear visibility in all conditions, even with polarized sunglasses. 

For external modules such as displays or accessory units, Summit Electronics provides pogo-pin connectors. These spring-loaded pins maintain reliable electrical contact, and the bike’s mechanical latch system secures the display module in place.

Buttons and switches must work in outdoor environments. Summit Electronics supplies rugged pushbuttons, tactile switches, and illuminated controls suited for e-bike handlebars and control pods. 

Some bikes even include audio feedback. Summit Electronics speakers and Goermicro MEMS microphones, paired with Cirrus Logic audio codecs, provide clear and reliable sound for alerts and rider interaction. 

Security and Access Control

Security is essential for both personal and shared e-bikes. Many systems use NFC or RFID to unlock the bike. ELATEC, Inc. | Allegion provides flexible RFID and NFC readers that support many protocols and withstand outdoor environments. 

Security integrates with the motion system. The Ceva, Inc. IMU detects unwanted movement when the bike is locked. If someone attempts to lift or roll it away, the system reacts immediately. For tracking and recovery, Quectel GNSS modules provide real-time location data, essential for fleet and rental systems. 

Together, these create a layered security system that protects both the rider and the equipment.

Connectors and Wiring Infrastructure 

All electronics inside an e-bike rely on a robust wiring system. Bikes endure vibration, weather, and daily mechanical stress. For power and signal connections, DEGSON provides durable connectors with strong locking mechanisms suited for battery, motor, controller, and sensor wiring. 

Inside the frame, the wiring harness links the battery, controller, sensors, display, motor, and wireless modules.  

Connectors rarely get attention, but they determine whether an e-bike feels reliable. When the wiring system is designed well, everything works seamlessly.

Closing Thoughts 

E-bikes may look simple on the outside, but inside the frame is a complete electronic ecosystem working together to deliver a smooth, safe ride. From power conversion and motor control to sensors, connectivity, security, and user interaction, every component plays an important role. 

TOP-electronics is an example of the sort of component supply partner that supports engineers throughout the entire design process. Whether it is selecting a DC/DC converter, custom display solution, choosing a motion sensor, integrating wireless communication, or finding the most appropriate connectors, a solid relationship with the right supplier can be critical in helping to build complete and reliable systems.  

SOURCES
Ambiq | https://www.linkedin.com/company/ambiqmicro/
Ceva, Inc | https://www.linkedin.com/company/ceva/
Cirrus Logic | https://www.linkedin.com/company/cirrus-logic/
Degson | https://www.linkedin.com/company/degson-electronic/
ELATEC, Inc. Allegion | https://www.linkedin.com/company/elatec-usa-inc./
FSP Technology, Inc. | https://www.linkedin.com/company/fsp-technology-inc./
Goermicro | https://en.goermicro.com/
Goford Semiconductor Co., Ltd | https://gofordsemi.com/
Gowin Semiconductor Co., Ltd. | https://www.linkedin.com/company/gowin-semiconductor-corp/
Lincoln Technology Solutions | https://www.linkedin.com/company/lincoln-technology-solutions/
MaxLinear | https://www.linkedin.com/company/maxlinear/
Quectel | https://www.quectel.com/
Summit Electronics | https://www.linkedin.com/company/summit-electronics-bv/
TOP Electronics | https://www.linkedin.com/company/top-electronics/

PUBLISHED IN CIRCUIT CELLAR MAGAZINE • MARCH 2025 #428 – Get a PDF of the issue

Keep up-to-date with our FREE Weekly Newsletter!

Don't miss out on upcoming issues of Circuit Cellar.


Note: We’ve made the Dec 2022 issue of Circuit Cellar available as a free sample issue. In it, you’ll find a rich variety of the kinds of articles and information that exemplify a typical issue of the current magazine.

Would you like to write for Circuit Cellar? We are always accepting articles/posts from the technical community. Get in touch with us and let's discuss your ideas.

Sponsor this Article
+ posts

about the AUTHOR
Wessel Snoey is an application and sales engineer at TOP-electronics, a design-oriented electronic components specialist. He supports customers in the U.S. region with embedded systems, power electronics, and sensor-based solutions, focusing on design-in support from concept through implementation.

"we love to connect... engineers and technology"

Supporting Companies

Upcoming Events


Copyright © KCK Media Corp.
All Rights Reserved

Copyright © 2026 KCK Media Corp.

Inside the Tech: E-Bikes Explained

by Wessel Snoey  time to read: 6 min