CC Blog Test Your EQ (Engineering Quotient)

EQ #52

Suppose you have an ordinary switch mode buck regulator. The input voltage is 100 V, the switch’s duty cycle is exactly 50%, and you measure the output voltage as 70 V. Is this converter operating in continuous conduction mode or discontinuous conduction mode?

How can you tell?

If a switch mode buck converter is operating in continuous conduction mode, then the output voltage is the fraction of the input voltage as defined by the duty cycle. 100 V × 0.5 would equal 50 V. Therefore, this converter is operating in discontinuous conduction mode.

Note that continuous conduction mode includes the case in which synchronous (active) rectification is being used and the current through the coil is allowed to reverse direction when the output is lightly loaded. The output voltage in relation to the input voltage will still be defined by the switch duty cycle.

Therefore, we also know that the regulator in question is not using synchronous rectification, but rather is using a diode instead.


Keep up-to-date with our FREE Weekly Newsletter!

— ADVERTISMENT—

Advertise Here



Don't miss out on upcoming issues of Circuit Cellar.

Note: We’ve made the May 2020 issue of Circuit Cellar available as a free sample issue. In it, you’ll find a rich variety of the kinds of articles and information that exemplify a typical issue of the current magazine.


Would you like to write for Circuit Cellar? We are always accepting articles/posts from the technical community. Get in touch with us and let's discuss your ideas.

Supporting Companies

Slider

Upcoming Events

Copyright © 2021 KCK Media Corp.

EQ #52

by Circuit Cellar Staff time to read: 1 min