CC Blog Test Your EQ (Engineering Quotient)

EQ #45

Suppose you have some 3-bit data, say, grayscale values for which 000 = black and 111 = white. You have a display device that takes 8-bit data, and you want to extend the bit width of your data to match.

If you just pad the data with zeros, you get the value 11100000 for white, which is not full white for the 8-bit display—that would be 11111111. What can you do?

One clever trick is to repeat the bits you have as many times as necessary to fill the output field width. For example, if the 3-bit input value is ABC, the output value would be ABCABCAB. This produces the following mapping, which interpolates nicely between full black and full white (see Table 1). Note that this mapping preserves the original bits; if you want to go back to the 3-bit representation, just take the MSBs and you have the original data.


Keep up-to-date with our FREE Weekly Newsletter!

Don't miss out on upcoming issues of Circuit Cellar.

Note: We’ve made the May 2020 issue of Circuit Cellar available as a free sample issue. In it, you’ll find a rich variety of the kinds of articles and information that exemplify a typical issue of the current magazine.

Would you like to write for Circuit Cellar? We are always accepting articles/posts from the technical community. Get in touch with us and let's discuss your ideas.


Advertise Here

Supporting Companies


Upcoming Events

Copyright © 2021 KCK Media Corp.

EQ #45

by Circuit Cellar Staff time to read: 1 min