CC Blog Product News Tech News

Class I and II 500 W Configurable Medical Power Supplies

TDK has announced the XMS500 series of AC-DC power supplies, rated at 500 W output power, with a Class I and Class II (no earth ground connection) construction. The series conforms to curve B conducted and radiated emissions, with a 6 dB margin and has a low leakage current of less than 150 µA. The high operating efficiency and mechanical design enables the XMS500 to operate at full load with airflow rates of just 1 m/s, reducing audible noise. Applications include home healthcare, hospital, imaging and clinical diagnostic systems in addition to industrial, test and measurement and communications equipment.

xms500-pr-nov17-whiteDesigned as a configurable product, engineers can select from multiple standard options, to optimize both system performance and cost, without incurring development charges or minimum purchase quantities. The options include case styles (including an internal low speed fan), a choice of standby voltage, a 12 V fixed or variable speed fan supply, remote on/off, AC fail and single or dual input fuses. 12 V, 24 V, 3 6V or 48 V nominal outputs are offered, with other voltages upon request.

The XMS500 accepts a 90 VAC to 264 VAC input, withstanding 300Vac for five seconds and can operate in ambient temperatures of up to +70°C, derating linearly above 50°C by 2.5% per °C. The open frame version measures 102 mm x 180 mm x 37 mm and the U-channel 107 mm x 180 mm x 39.5 mm. The low profile allows installation in systems where space is limited.

All models are certified to IEC/EN/UL/CSA 60601-1 and IEC/EN/UL/CSA 60950-1 with CE marking for the Low Voltage, EMC and RoHS2 Directives. The series is compliant to EN 55011-B, EN 55032-B conducted and radiated emissions (for both Class I and II), EN 61000-3-2 harmonics, IEC 60601-1-2 Edition 4, and IEC 61000-4 immunity standards.

Input to output isolation is 4,000 VAC (2 x MoPP), input to ground isolation 1,500 VAC (1 x MoPP) and output to ground isolation is 1,500 VAC (1 x MoPP) for suitability in B and BF rated equipment.

TDK-Lambda Americas | www.us.tdk-lambda.com

— ADVERTISMENT—

Advertise Here


Don't miss out on upcoming issues of Circuit Cellar. Subscribe today!

 
 
Note: We’ve made the October 2017 issue of Circuit Cellar available as a free sample issue. In it, you’ll find a rich variety of the kinds of articles and information that exemplify a typical issue of the current magazine.


Would you like to write for Circuit Cellar? We are always accepting articles/posts from the technical community. Get in touch with us and let's discuss your ideas.

Become a Sponsor