5-V Qi Low-Power Wireless Charging Transmitter Reference Design

NXP Semiconductors has announced the availability of a new reference design for 5-V low-power Qi wireless charging transmitters, compliant with the Wireless Power Consortium (WPC) 1.1 Qi specification. The design is based on NXPs single-chip 5-V wireless power transmitter IC—the NXQ1TXA5 that was launched in 2014. It is the latest addition to NXP’s portfolio of Greenchip power solutions.NXP NXQ1TXA5

Building on NXP’s success as the market leader in Greenchip power ICs, the NXQ1TXA5 reference design has an unrivalled standby power consumption of less than 10 mW. It is the only solution on the market today that meets five-star mobile phone charger standby power ratings by consuming less than 30 mW in standby mode, which includes the standby power of the wall-charger. NXP recommends combining its NXQ1TXA5 ultra low standby power wireless power transmitter solution with another Greenchip device, its high efficiency TEA1720 SMPS IC with a standby power of less than 20 mW.

The NXQ1TXA5 device combines:

  • NXPs patented high efficiency Class D amplifier technology for outstanding EMI performance.
  • NXP’s ultra low power CoolFluxTM DSP technology for superior communication with smartphones placed on the charger.
  • Dedicated low power mixed signal circuitry to check for smartphone presence three times per second, enabling fast startup of charging, while keeping the standby power very low if there is no smartphone on the charger.

Due to the NXQ1TXA5’s  low-power consumption, the reference design also has a high efficiency for low transmitted powers, making it suitable for applications ranging from smartphone charging to deliver 5 W to the smartphone battery when used with a Qi compliant wireless charging receiver, to chargers for wearables that need less than 2-W charging power.

The NXQ1TXA5 reference design needs only 15 to 20 low-cost passive components and uses a standard two-layer PCB, with the components mounted on a single side. Depending on customer requirements, the complete application can be designed on a board space as small as 3 × 3 or 4 × 4 cm.

The new NXQ1TXA5 wireless charging transmitter reference design will be available in Q2.

Source: NXP Semiconductors

ADVERTISMENT