Low-Power Remote-Control Transceivers

LinxThe TT Series remote-control transceiver is designed for bidirectional, long-range, remote-control applications. The module includes an optimized frequency-hopping spread spectrum (FHSS) RF transceiver and an integrated remote-control transcoder.

The FHSS is capable of reaching more than 2 miles in typical line-of-sight environments with 0-dB gain antennas. An amplified version increases the output power from 12.5 to 23.5 dBm, boosting the range to more than 8 miles in line-of-sight environments with 0-dB antennas.

The TT Series transceiver features best-in-class receive sensitivity (up to −111 dBm) and low power consumption (only 19.2 mA in receive mode and 36 mA in transmit mode at 12.5 dBm). The initial version operates in the 902-to-928-Hz frequency band for North and South America.

The transceiver is housed in a compact reflow-compatible surface-mount technology (SMT) package. It doesn’t require any external RF components except an antenna, which simplifies integration and reduces assembly costs.

Programming is not required for basic operation. The transceiver’s primary settings are hardware-selectable, which eliminates the need for an external microcontroller or other digital interface. Eight status lines can be set up in any combination of inputs and outputs to transfer button or contact states. A selectable acknowledgement indicates that the transmission was successfully received. For advanced features, a UART interface provides optional software configuration.

A simple pairing operation configures two modules to operate together. A single button press on each side causes the modules to automatically swap their 32-bit addresses and store them in nonvolatile memory. It can be configured to automatically send an acknowledgement to the transmitting unit either after receiving a command or with external circuitry when an action has taken place. An optional external processor can send two data bytes with the acknowledgement.

The TT Series transceiver module is available as part of Linx Technologies’s master development system that comes with two development boards for benchmarking and prototyping. Each board is populated with a transceiver, two remote-control development boards, and programming boards. The system also includes antennas, a daughterboard with a USB interface, demonstration software, extra modules, and connectors.

Contact Linx Technologies for pricing.

Linx Technologies
www.linxtechnologies.com

RS-232 Serial Adapter for Android Devices

ACCESSThe ANDROID-232 is a USB serial interface board that enables you to control legacy RS-232 devices from your Android devices. The board is well suited for POS, gaming systems, retail, hospitality, automation, kiosks, defense industries, lighting, or any other application requiring the connection of RS-232 serial devices to an Android-compatible system.

The ANDROID-232 uses the Android Open Accessory protocol to “convince” an Android device that its on-board USB port (normally limited to USB slave or OTG modes) is actually an RS-232 port. This two-way data port enables external hardware to control the Android unit or the Android unit to control external hardware.

The ANDROID-232’s key features include an Android USB 2.0 full-speed host-to-industry-standard RS-232 DB9M serial port; support for a UART interface with RX, TX, RTS, and CTS; a 5,512-byte RX buffer size; a 256-byte TX buffer size; ±15-kV ESD protection on USB data lines and all RS-232 signals; status and fault LEDs including external power, charging status, and USB status; a Type-A USB connector; a latching 5-V external power input connector with an external regulated power supply; a –40°C-to-85°C standard industrial operating temperature; and RoHS compliance.

The board includes an Android sample program with source code. This program enables you to verify proper operation of the ANDROID-232 device, including sending and receiving RS-232 data. The ANDROID-232’s Python test program can cooperate with the Android sample program to verify proper receipt of transmitted data.

The ANDROID-232 costs $139.

ACCES I/O Products, Inc.
www.accesio.com