PCB Service for Prototypes

Elektor recently inked a deal with Eurocircuits for the production and sale of PCBs. The decision is an important step toward delivering valuable services to Elektor members.

All of Elektor’s PCB orders will be handled by Eurocircuits. If you have a nice design yourself, you can try the Elektor PCB Service for prototypes or small production runs. Visit ElektorPCBService.com for more information.

Elektor.TV visited the Eurocircuits booth at the Electronics Show in Munich. In the video Dirk Stans (a Eurocircuits owner) comments on some of the company’s services and deliverables.

CircuitCellar.com is an Elektor International Media site.

Check Your PCB Design Online Before Ordering

Did you know Circuit Cellar’s parent company, Elektor, offers a standard PCB service? The PCB service was originally launched in 2009, and since then more than 3,000 users have been registered.

Who will benefit from the service? Ask yourself: Are you an electronics designer who occasionally designs a PCB and then sends it off to a PCB manufacturing house? If so, you’re likely familiar with that nagging feeling of uncertainty about the correctness of your production files. Did you check the Gerber files you uploaded? Are you sure that the PCB manufacturing house will interpret your board data properly?

The PCB Visualizer and Checker is a fully automated interactive web tool that enables you to review your design files before ordering the PCB. After uploading your design files, the tool analyzes them and shows you what the manufacturer sees. Possible design issues are highlighted and you’re provided insight into critical areas of the PCB production process. Your design is verified against your board specifications, and you’re provided a list of the modifications needed to get it ready for production. Finally, the visualizer renders the board as it will be shipped before production has even started!

For more information, check out the latest addition to the Elektor CircuitCellar PCB Service.

Elektor Weekly Wrap-Up: Projects Update & LED Book/Kit

Yet again, last week was hectic yet productive for my Elektor colleagues overseas: articles were edited, design projects were undertaken, and much more.  Here’s the inside scoop on two important items.

Progress  at “Elektor Projects”

The ”Elektor Projects” website is officially live, and members have begun sharing their electronics experiences and discussing projects.

Check out some of the current projects members can join:

  • Pico C-Plus and Pico C-Super
  • MYC, a universal system to control devices and programs
  • Sub low pass filter
  • Wheelie 2
  • USB record digitizer with RIAA correction
  • Analog Theremin

Go to www.elektor-projects.com to find out more.

LED Book & Kit Promo

Elektor announced a nice offer for members interested in Willem van Dreumel’s book Fun with LEDs. For a limited time, Elektor members get 15% discount and free shipping and handling. Here’s the info about the book straight from Elektor:

LEDs are found everywhere these days. These colorful lights seem to offer so many you may wonder where to begin using them. This booklet presents more than twenty exciting projects covering LEDs, aimed at young & old. From an Air Writer, a Party Light, Running Lights, a LED Fader right up to a Christmas Tree.

Use this book to replicate various projects and then put them into practice. To give you a head start each project is supported by a brief explanation, schematics and photos. In addition, the free support page on the Elektor website has a few inspiring video links available that elaborate on the projects.

A couple of projects employ the popular Arduino microcontroller board that’s graced by a galaxy of open source applications.

An optional 60-piece starter kitis also available with the book.

Starter kit

The kit includes:

  • 1 pc. breadboard w. 270 contacts
  • 1m hookup wire
  • 1 pc. 9V battery clip
  • 27 pcs. carbon film resistor (27E, 56E, 82E, 150E, 270E, 330E, 390E, 8x 470E, 560E, 1K, 6x 2K2, 10K, 3M9, 4M7, 5M6)
  • 4 pcs. ceramic capacitors (10nF; 5mm pitch)
  • 5 pcs. BS170
  • 1 pc. LM555CN (NE555CN)
  • 1 pc. C4017 (HEF4017)
  • 3 pcs. trimpot, horizontal (1K, 10K, 100K, + 3 wheels), pitch 10mm/12.5mm, with spindle
  • 1 pc. RGB LED (4-pin)
  • 1 pc. UV LED, 5mm
  • 1 pc. LED, 5mm, Rainbow (Colour-Change)
  • 5 pcs. LED, diffuse, red, 5mm
  • 5 pcs. LED, diffuse, yellow, 5mm
  • 5 pcs. LED diffuse, green, 5mm
  • 3 pcs. LED, bright blue, 5mm
  • 3 pcs. LED, bright white, 5mm
  • 2 pcs. 1N4148 diode
  • 3 pcs. 10uF electrolytic (10uF/25V), pitch 2.54mm
  • 3 pcs. 220uF electrolytic (220uF/25V), pitch 5mm
  • 1 pc. 74HC14
  • 1 pc. LM324
  • 1 pc. CD4093 (HEF4093)
  • 3 pcs. BC547B

You can use the kit build and test circuits on a breadboard without having to get involved with soldering.

CircuitCellar.com is an Elektor International Media publication.

 

EAGLE Design Challenge: Design the Next Innovation for Microchip in EAGLE V6

CadSoft and Premier Farnell announced recently the start of the EAGLE Design Challenge, which will run until August 31, 2012. Design engineers can submit design projects for a shot at winning prizes with an overall value of around $7,000.

The competition is powered by Microchip and hosted on element14. Elektor and Circuit Cellar are acting as media partners.

Participation

To participate, applicants must ensure that all designs use EAGLE Version 6 and that a Microchip MCU or DSC will be integrated in the design.

After registering at element14, you can submit a screenshot of your layout and add a project description on the competition page.

If you don’t have an EAGLE license and want to participate in the contest, you can download a free 30-days trial version at www.element14.com/eagle-freemium.

Judging

The competition will feature peer voting from the element14 community. Community members “like” entries and submit comments.

A panel of judges—consisting of CadSoft, Premier Farnell and Microchip representatives along with independent EAGLE expert Prof. Dr. Francesco Volpe from the University of Applied Sciences in Aschaffenburg—will pick the winners based on the “likes” and comments from community members. According to the rules, “judging criteria include clarity in description of the submission, its electronic concept, design complexity, design quality, and functionality.”

Prizes

1. DELL Alienware M17x r3 + EAGLE version 6 Professional incl. all three modules.

2. MICROCHIP DV164037 Kit, Eval, ICD3 w/ Explorer-16 & DM163022-1 8-Bit development board + EAGLE Version 6 Professional incl. all three modules.

3. EAGLE Version 6 Standard incl. all three modules.

Visit www.element14.com/eagle-competition for more details as well as the terms and conditions.

 

 

Design West Update: Compilers Unveiled

IAR Systems announced Tuesday at Design West in San Jose, CA, that GainSpan selected IAR Embedded Workbench as its primary development tool chain for MCU drivers and next-generation chip. “By standardizing on IAR Systems’ embedded software development tool chain, GainSpan will more easily support a wide range of MCUs to communicate with their modules,” IAR publicized a in a release.

It’s an important aspect of a larger plan, IAR’s ARM Strategic Accounts Manager Mike Skrtic said. IAR has overall tool chain standardization goals aimed at giving designers’ more flexibility when choosing MCUs for product development.

Remember: IAR Systems is teamed with Renesas for the RL78 Green Energy Challenge, which is administered by Circuit Cellar and Elektor. Designers are challenged to transform how the world experiences energy efficiency by developing a unique, low-power application using the RL78 MCU and IAR toolchain.

In other compiler-related news, Microchip Technology announced Monday at Design West its new MPLAB XC C compiler line, which supports its approximately 900 microcontrollers. Microchip’s Joe Drzewiecki said the compilers reduce code size by about 35% and improve code execution speed by about 30%. But you can judge for yourself because Microchip offers 8-, 16-, and 32-bit free editions of MPLAB XC compilers. According to Microchip reps, they are” fully functional and have no license restrictions for commercial use.”

So, if you give MPLAB XC a try, let us know what you think!