Scott Garman, Technical Evangelist

This article was a preview of an upcoming interview in the February issue of Circuit Cellar. The full interview is now available here.
Garman_web

Scott Garman is a Portland, OR-based Linux software engineer. Scott is very involved with the Yocto Project, an open-source collaboration that provides tools for the embedded Linux industry. Scott tells us about how he recently helped Intel launch MinnowBoard, the company’s first open-hardware SBC. The entire interview will be published in Circuit Cellar’s February issue.—Nan Price, Associate Editor

NAN: What is the Yocto Project?

 SCOTT: The Yocto Project is centered on the OpenEmbedded build system, which offers a tremendous amount of flexibility in how you can create embedded Linux distros. It gives you the ability to customize nearly every policy of your embedded Linux system.

I’ve developed training materials for new developers getting started with the Yocto Project, including “Getting Started with the Yocto Project—New Developer Screencast Tutorial.”

MinnowBoardWEB

Scott was involved with a MinnowBoard robotics and computer vision demo at LinuxCon Japan, May 2013.

NAN: Tell us about Intel’s recently introduced the MinnowBoard SBC.

SCOTT: The MinnowBoard is based on Intel’s Queens Bay platform, which pairs a Tunnel Creek Atom CPU (the E640 running at 1 GHz) with the Topcliff Platform controller hub. The board has 1 GB of RAM and includes PCI Express, which powers our SATA disk support and gigabit Ethernet. It’s an SBC that’s well suited for embedded applications that can use that extra CPU and especially I/O performance.

MinnowBoardOWI_web

Scott worked on a MinnowBoard demo built around an OWI Robotic Arm.

The MinnowBoard also has embedded bus standards including GPIO, I2C, SPI, and even CAN (used in automotive applications) support. We have an expansion connector on the board where we route these buses, as well as two lanes of PCI Express for custom high-speed I/O expansion.

NAN: What compelled Intel to make the MinnowBoard open hardware?

SCOTT: The main motivation for the MinnowBoard was to create an affordable Atom-based development platform for the Yocto Project. We also felt it was a great opportunity to try to release the board’s design as open hardware.

Two-Channel CW Laser Diode Driver with an MCU Interface

The iC-HT laser diode driver enables microcontroller-based activation of laser diodes in Continuous Wave mode. With this device, laser diodes can be driven by the optical output power (using APC), the laser diode current (using ACC), or a full controller-based power control unit.

The maximum laser diode current per channel is 750 mA. Both channels can be switched in parallel for high laser diode currents of up to 1.5 A. A current limit can also be configured for each channel.

Internal operating points and voltages can be output through ADCs. The integrated temperature sensor enables the system temperature to be monitored and can also be used to analyze control circuit feedback. Logarithmic DACs enable optimum power regulation across a large dynamic range. Therefore, a variety of laser diodes can be used.

The relevant configuration is stored in two equivalent memory areas. Internal current limits, a supply-voltage monitor, channel-specific interrupt-switching inputs, and a watchdog safeguard the laser diodes’ operation through iC-HT.

The device can be also operated by pin configuration in place of the SPI or I2C interface, where external resistors define the APC performance targets. An external supply voltage can be controlled through current output device configuration overlay (DCO) to reduce the system power dissipation (e.g., in battery-operated devices or systems).

The iC-HT operates on 2.8 to 8 V and can drive both blue and green laser diodes. The diode driver has a –40°C-to-125°C operating temperature range and is housed in a 5-mm × 5-mm, 28-pin QFN package.

The iC-HT costs $13.20 in 1,000-unit quantities.

iC-Haus GmbH
www.ichaus.com