Dual-Channel Waveform Generators

B&K Precision 4053 Waveform Generator

B&K Precision 4053 Waveform Generator

The 4050 Series is a new line of four dual-channel function/arbitrary waveform generators. The instruments can generate 5-to-50-MHz waveforms for applications requiring stable and precise sine, square, triangle, and pulse waveforms with modulation and arbitrary waveform capabilities.

All models provide a main output voltage that can be vary from 0 to 10 VPP into 50 Ω and a secondary output that can vary from 0 to 3 VPP into 50 Ω. The generators feature a 3.5” color LCD, a rotary control knob, and a numeric keypad with dedicated waveform keys and output buttons.

The 4050 Series provides users with 48 built-in arbitrary waveforms. Using the included waveform editing software via the standard USB interface on the rear, users can create and load up to 10 custom 16-kpt waveforms. For general-purpose interface bus (GPIB) connectivity, an optional USB-to-GPIB adapter is available.

The generators offer a variety of modulation schemes for modulated signal applications including amplitude and frequency modulation (AM/FM), double sideband amplitude modulation (DSB-AM), amplitude and frequency shift keying (ASK/FSK), phase modulation (PM), and pulse-width modulation (PWM). Additional standard features include a linear and logarithmic sweep function, a built-in counter, sync output, a trigger I/O terminal, and a USB host port on the front panel to save and recall instrument settings and waveforms. A standard external 10-MHz reference clock input is provided to synchronize the instrument to another generator.

The 4052 (5-MHz) costs $499, the 4053 (10 MHz) costs $599, the 4054 (25 MHz) costs $850, and the 4055 (50 MHz) costs $1,050. Note: B&K Precision is offering 10% off MSRP through November 30, 2013. See website for details.

B&K Precision Corp.
www.bkprecision.com

Linear Regulator with Current and Temperature Monitor Outputs

Linear Technology Corp

Linear Technology Corp

The LT3081 is a rugged 1.5-A wide input voltage range linear regulator with key usability, monitoring, and protection features. The device has an extended safe operating area (SOA) compared to existing regulators, making it well suited for high input-to-output voltage and high output current applications where older regulators limit the output.

The LT3081 uses a current source reference for single-resistor output voltage settings and output adjustability down to ”0.” A single resistor can be used to set the output current limit. This regulator architecture, combined with low-millivolt regulation, enables multiple ICs to be easily paralleled for heat spreading and higher output current. The current from the device’s current monitor can be summed with the set current for line-drop compensation, where the LT3081’s output increases with current to compensate for line drops.

The LT3081 achieves line and load regulation below 2 mV independent of output voltage and features a 1.2-to-40-V input voltage range. The device is well suited for applications requiring multiple rails. The output voltage is programmable with a single resistor from 0 to 38.5 V with a 1.2-V dropout. The on-chip trimmed 50-µA current reference is ±1% accurate. The regulation, transient response, and output noise (30 µVRMS) are independent of output voltage due to the device’s voltage follower architecture.

Two resistors are used to configure the LT3081 as a two-terminal current source. Input or output capacitors for stability are optional in either linear regulator or current-source operation mode. The LT3081 provides several monitoring and protection functions. A single resistor is used to program the current limit, which is accurate to ±10%. Monitor outputs provide a current output proportional to temperature (1 µA/°C) and output current (200 µA/A), enabling easy ground-based measurement. The current monitor can compensate for cable drops. The LT3081’s internal protection circuitry includes reverse-input protection, reverse-current protection, internal current limiting, and thermal shutdown.

A variety of grades/temperature ranges are offered including: the E and  I grades (–40°C to 125°C), the H grade (–40°C to 150°C), and the high-reliability MP grade (–55°C to 50°C). Pricing for the E-grade starts at $2.60 each in 1,000-piece quantities.

Linear Technology Corp.
www.linear.com