Linux System Configuration (Part 1)

In Circuit Cellar’s June issue, Bob Japenga, in his Embedded in Thin Slices column, launches a series of articles on Linux system configuration. Part 1 of the series focuses on configuring the Linux kernel. “Linux kernels have hundreds of parameters you can configure for your specific application,” he says.

Linux system configurationPart 1 is meant to help designers of embedded systems plan ahead. “Many of the options I discuss cost little in terms of memory and real-time usage,” Japenga says in Part 1. “This article will examine the kinds of features that can be configured to help you think about these things during your system design. At a minimum, it is important for you to know what features you have configured if you are using an off-the-shelf Linux kernel or a Linux kernel from a reference design. Of course, as always, I’ll examine this only in thin slices.”

In the following excerpt from Part 1, Japenga explains why it’s important to be able to configure the kernel. (You can read the full article in the June issue, available online for single-issue purchase or membership download.)

Why Configure the Kernel?
Certainly if you are designing a board from scratch you will need to know how to configure and build the Linux kernel. However, most of us don’t build a system from scratch. If we are building our own board, we still use some sort of reference design provided by the microprocessor manufacturer. My company thinks these are awesome. The reference designs usually come with a prebuilt kernel and file system.

Even if you use a reference design, you almost always change something. You use different memory chips, physical layers (PHY), or real-time clocks (RTCs). In those cases, you need to configure the kernel to add support for these hardware devices. If you are fortunate enough to use the same hardware, the reference design’s kernel may have unnecessary features and you are trying to reduce the memory footprint (which is needed not just because of your on-board memory but also because of the over-the-air costs of updating, as I mentioned in the introduction). Or, the reference design’s kernel may not have all of the software features you want.

For example, imagine you are using an off-the-shelf Linux board (e.g., a Raspberry Pi or’s BeagleBone). It comes with everything you need, right? Not necessarily. As with the reference design, it may use too many resources and you want to trim it, or it may not have some features you want. So, whether you are using a reference design or an off-the-shelf single-board computer (SBC), you need to be able to configure the kernel.

Linux Kernel Configuration
Many things about the Linux kernel can be tweaked in real time. (This is the subject of a future article series.) However, some options (e.g., handling Sleep mode and support for new hardware) require a separate compilation and kernel build. The Linux kernel is written in the C programming language, which supports code that can be conditionally compiled into the software through what is called a preprocessor #define

A #define is associated with each configurable feature. Configuring the kernel involves selecting the features you want with the associated #define, recompiling, and rebuilding the kernel.

Okay, I said I wasn’t going to tell you how to configure the Linux kernel, but here is a thin slice: One file contains all the #defines. Certainly, one could edit that file. But the classic way is to invoke menuconfig. Generally you would use the make ARCH=arm menuconfig command to identify the specific architecture.

There are other ways to configure the kernel—such as xconfig (QT based), gconfig (GTK+ based), and nconfig (ncurses based)—that are graphical and purport to be a little more user-friendly. We have not found anything unfriendly with using the classical method. In fact, since it is terminal-based, it works well when we remotely log in to the device.

Photo 1—This opening screen includes well-grouped options for easy menu navigation.

Photo 1—This opening screen includes well-grouped options for easy menu navigation.

Photo 1 shows the opening screen for one of our configurations. The options are reasonably well grouped to enable you to navigate the menus. Most importantly, the mutual dependencies of the #defines are built into the tool. Thus if you choose a feature that requires another to be enabled, that feature will also automatically be selected.

In addition to the out-of-the-box version, you can easily tailor all the configuration tools if you are adding your own drivers or drivers you obtain from a chip supplier. This means you can create your own unique menus and help system. It is so simple that I will leave it to you to find out how to do this. The structure is defined as Kconfig, for kernel configuration.

Programmable Logic Controller Board

SmartTILE illustration 6.psdThe SmartTILE (Smart TRi Integrated Logic Engine) is a programmable logic controller CPU board that plugs onto a carrier I/O board. The board integrates a 32-bit CPU, ferroelectric RAM (FRAM) and flash memory, a battery-backed real-time clock, and an Ethernet port on board. Its digital, analog, and serial I/O signals are brought to a user’s carrier board via three sets of header pins.

All critical components are already built-in on board. A user just needs to design a simple carrier PCB that contains a D/A circuit that interfaces the SmartTILE’s low-voltage signals to real-world voltages and currents (e.g., 24, 120, or 240 V).

The SmartTILE-Fx provides 16 digital inputs, 16 digital outputs (5-V CMOS logic level), eight analog inputs, and four analog outputs (12-bit, 0-5V) and can be expanded to 128 digital inputs and 128 digital outputs. The controller board -Fx provides three channels of serial ports (3.3 V, TX, RX, and /RTS) that can interface to RS-232, RS-485, or even wireless radio. An I2C port (3.3 V) is also available, allowing OEM to interface to specialty ICs that support I2Cbus.

Contact Triangle Research International for pricing.

Triangle Research International, Inc.