Since Linux was released in 1991, it has become the operating system for “98% of the world’s super computers, most of the servers powering the Internet, the majority of financial trades worldwide, and tens of millions of Android mobile phones and consumer devices,” according to the Linux Foundation. ”In short, Linux is everywhere.”
Linux offers a variety of file systems that are relatively easy to implement. Circuit Cellar columnist Bob Japenga, co-founder of MicroTools, writes about these specialized Linux file systems as part of his ongoing series examining embedded file systems. His latest article, which also discusses the helpful Samba networking protocol, appears in the magazine’s April issue.
The following article excerpts introduce the file systems and when they should be used. For more details, including instructions on how to use these file systems and the Samba protocol, refer to Japenga’s full article in the April issue.
What It Is—Our systems demand more and more memory (or file space) and a compressed read-only file system (CRAMFS) can be a useful solution in some instances.
CRAMFS is an open-source file system available for Linux. I am not sure where CRAMFS gets its name. Perhaps it gets its name because CRAMFS is one way to cram your file system into a smaller footprint. The files are compressed one page at a time using the built-in zlib compression to enable random access of all of the files. This makes CRAMFS relatively fast. The file metadata (e.g., information about when the file was created, read and write privileges, etc.) is not compressed but uses a more compact notation than is present in most file systems.
When to Use It—The primary reason my company has used CRAMFS is to cut down on the flash memory used by the file system. The first embedded Linux system we worked on had 16 MB of RAM and 32 MB of flash. There was a systems-level requirement to provide a means for the system to recover should the primary partition become corrupt or fail to boot in any way. (Refer to Part 3 of this article series “Designing Robust Flash Memory Systems,” Circuit Cellar 283, 2014, for more detail.) We met this requirement by creating a backup partition that used CRAMFS.
The backup partition’s only function was to enable the box to recover from a corrupted primary partition… We were able to have the two file systems identical in file content, which made it easy to maintain. Using CRAMFS enabled us to cut our backup file system space requirements in half.
A second feature of CRAMFS is its read-only nature. Given that it is read-only, it does not require wear leveling. This keeps the overhead for using CRAMFS files very low. Due to the typical data retention of flash memory, this also means that for products that will be deployed for more than 10 years, you will need to rewrite the CRAMFS partition every three to five years…
RAM FILE SYSTEMS
What It Is—Linux provides two types of RAM file systems: ramfs and tmpfs. Both are full-featured file systems that reside in RAM and are thus very fast and volatile (i.e., the data is not retained across power outages and system restarts).
When the file systems are created with the mount command, you specify the ramfs size. However, it can grow in size to exceed that amount of RAM. Thus ramfs will enable you to use your entire RAM and not provide you with any warning that it is doing it. tmpfs does not enable you to write more than the space allocated at mount time. An error is returned when you try to use more than you have allocated. Another difference is that tmpfs uses swap space and can swap seldom used files out to a flash drive. ramfs does not use swapping. This difference is of little value to us since we disable swapping in our embedded systems.
When to Use It—Speed is one of the primary reasons to use a RAM file system. Disk writes are lightning fast when you have a RAM disk. We have used a RAM file system when we are recording a burst of high-speed data. In the background, we write the data out to flash.
A second reason to use a RAM file system is that it reduces the wear and tear on the flash file system, which has a limited write life. We make it a rule that all temporary files should be kept on the RAM disk. We also use it for temporary variables that are needed across threads/processes.
NETWORK FILE SYSTEM (NFS)
What It Is—In the early 1990s I started working with a company that developed embedded controllers for machine control. These controllers had a user interface that consisted of a PC located on the factory floor. The company called this the production line console (PLC). The factory floor was hot, very dirty, and had a lot of vibration. The company had designed a control room console (CRC) that networked together several PLCs. The CRC was located in a clean and cool environment. The PLC and the CRC were running QNX and the PLC was diskless. The PLC booted from and stored all of its data on the CRC (see Figure 1).
This was my first exposure to a Network File System (NFS). It was simple and easy to configure and worked flawlessly. The PLCs could only access their “file system.” The CRC could access any PLC’s files.
QNX was able to do this using the NFS protocol. NFS is a protocol developed initially by Sun Microsystems (which is now owned by Oracle). Early in its lifetime, Sun turned the specification into an open standard, which was quickly implemented in Unix and its derivatives (e.g., Linux and QNX).
When to Use It—One obvious usage of NFS is for environments where a hard drive cannot easily survive, as shown in my earlier example. However, my example was before flash file systems became inexpensive and reliable so that is not a typical use for today.
Another use for NFS would be to simplify software updates. All of the software could be placed in one central location. Each individual controller would obtain the new software once the central location was updated.
The major area in which we use NFS today is during software development. Even though flash file systems are fast and new versions of your code can be seamlessly written to flash, it can be time consuming. For example, you can use a flash memory stick over USB to update the flash file system on several of our designs. This is simple but can take anywhere from several seconds to minutes.
With NFS, all of your development tools can be on a PC and you never have to transfer the target code to the target system. You use all of your PC tools to change the file on your PC, and when the embedded device boots up or the application is restarted, those changed files will be used on the device.
What It Is—Although we don’t like to admit it, many of us still have Windows machines on our desks and on our laptops. And many of us are attached to some good development tools on our Windows machines.
Samba is not exactly a file system but rather a file system/networking protocol that enables you to write to your embedded system’s file system from your Windows machine as if it were a Windows file system. Samba can also be used to access your embedded system’s files from other OSes that support the SMB/CIFS networking protocol.
When to Use It—Although I primarily see Samba, like NFS, as a development tool, you could certainly use it in an environment where you needed to talk to your embedded device from a Windows machine. We have never had a need for this, but I can imagine it could be useful in certain scenarios. The Linux community documents a lot of Samba users for embedded Linux.