A Workspace for Radio & Metrology Projects

Ralph Berres, a television technician in Germany, created an exemplary design space in his house for working on projects relating to his two main technical interests: amateur radio and metrology (the science of measurement). He even builds his own measurement equipment for his bench.

Ralph Berres built this workspace for his radio and metrology projects

“I am a licensed radio amateur with the call sign DF6WU… My hobby is high-frequency and low-frequency metrology,” Berres wrote in his submission.

Amateur radio is popular among Circuit Cellar readers. Countless electrical engineers and technical DIYers I’ve met or worked with during the past few years are amateur radio operators. Some got involved in radio during childhood. Others obtained radio licenses more recently. For instance, Rebecca Yang of Tymkrs.com chronicled the process in late 2011. Check it out: http://youtu.be/9HfmyiHTWZI and http://tymkrs.tumblr.com/.

Do you want to share images of your workspace, hackspace, or “circuit cellar” with the world? Click here to email us your images and workspace info.


RFI Bypasssing

With GPS technology and audio radio interfaces on his personal fleet of bikes, Circuit Cellar columnist Ed Nisley’s family can communicate to each other while sending GPS location data via an automatic packet reporting system (APRS) network. In his February 2012 article, Ed describes a project for which he used a KG-UV3D radio interface rigged with SMD capacitors to suppress RF energy. He covers topics such as test-fixture measurements on isolated capacitors and bypassing beyond VHF.

Photo 2 from the Febuary article, "RFI Bypassing (Part 1)." A pair of axial-lead resistors isolate the tracking generator and spectrum analyzer from the components under test. The 47-Ω SMD resistor, standing upright just to the right of the resistor lead junction, forms an almost perfect terminator. (Source: Ed Nisley CC259)

Ed writes:

Repeatable and dependable measurements require a solid test fixture. Although the collection of parts in Photo 2 may look like a kludge, it’s an exemplar of the “ugly construction” technique that’s actually a good way to build RF circuits. “Some Thoughts on Breadboarding,” by Wes Hayword, W7ZOI, gives details and suggestions for constructing RF projects above a solid printed circuit board (PCB) ground plane.

You can read this article now in Circuit Cellar 259. If you aren’t a subscriber, you can purchase a copy of the issue here.