Rugged IoT Gateways are Based on i.MX6 and Raspberry Pi

Kontron has announced two new industrial computers, the KBox A-330-RPI and KBox A-330-MX6, specifically designed for cost-sensitive control and gateway applications. The KBox A-330-RPI is based on the long-term available Raspberry Pi Compute Module CM3+ and can therefore use the huge software pool of the Raspberry Pi community. Equipped with a Broadcom BCM2837 Quad Core Arm processor, the KBox A-330-RPI is compatible with the established Raspberry Pi standards and has been enhanced with industrial features.

The new KBox A-330-MX6 differs from the KBox A-330-RPI primarily by the Dual Core i.MX6 processor from NXP, which is, like the Raspberry Pi Compute Module CM3+, long term available. In addition, the variant based on the NXP processor optionally offers additional industrial protocol stacks such as EtherCAT, PROFINET, Modbus and CANopen to enable customers to easily integrate control software.

Both KBox A-330 variants operate fanless and are designed for industrial control and gateway tasks in control cabinets due to their slim design and the possibility of DIN rail mounting. Two Fast Ethernet ports, RS232, RS485 or CAN and four I/O ports are available as interfaces. A powerful user interface can be operated during commissioning or in the target application via two USB channels and an HDMI connection.

With the KBox A-330 family Kontron offers an industrial grade platform that enables connection to various communication levels, serves as a gateway for IoT applications and can integrate sensors and actuators. As operating system Kontron offers Yocto Linux for the KBox A-330-MX6 and Raspbian for the KBox A-330-RPI. On a project basis, applications are realizable that include advanced security features such as secure authentication and data encryption that go beyond normal security requirements.

In conjunction with the modular IoT software framework SUSiEtec from Kontron’s sister company S&T Technologies, any applications and cloud solutions on the market—from sensors to edge computers to private or public clouds—can also be connected and supported to develop IoT applications or establish new business models.

Kontron | www.kontron.com

Single-Chip, Multi-Protocol Switch for Intelligent Apps

Analog Devices recently introduced a real-time Ethernet, multi-protocol (REM) switch chip Ethernet connectivity solution for intelligent factory applications. Well suited for a variety of connected motion applications, you can use the “TSN-ready” (time sensitive networking) fido5000 with any processor, any protocol, and any stack.

The fido5000 two-port embedded Ethernet switch’s features, specs, and benefits include:

  • Reduces board size and power consumption while improving Ethernet performance at the node under any network load condition.
  • Attaches to Analog’s ADSP-SC58x, ADSP-2158x, and ADSP-CM40x motion control processors
  • Supports PROFINET RT/IRT, EtherNet/IP with beacon-based DLR, ModbusTCP, EtherCAT, SERCOS, and POWERLINK.
  • Achieves cycle times below 125 µs
  • Includes drivers for simple integration with any Industrial Ethernet protocol stack

The fido5100 is scheduled for full production in September 2017 and will cost $6 each in 1,000-piece quantities. The fido5200 (EtherCAT Capable) is also scheduled for full production in September 2017 and will cost $8 each in 1,000-piece quantities.

Analog Devices | www.analog.com