Flexible I/O Expansion for Rugged Applications

WynSystemsThe SBC35-CC405 series of multi-core embedded PCs includes on-board USB, gigabit Ethernet, and serial ports. These industrial computers are designed for rugged embedded applications requiring extended temperature operation and long-term availability.

The SBC35-CC405 series features the latest generation Intel Atom E3800 family of processors in an industry-standard 3.5” single-board computer (SBC) format COM Express carrier. A Type 6 COM Express module supporting a quad-, dual-, or single-core processor is used to integrate the computer. For networking and communications, the SBC35-CC405 includes two Intel I210 gigabit Ethernet controllers with IEEE 1588 timestamping and 10-/100-/1,000-Mbps multispeed operation. Four Type-A connectors support three USB 2.0 channels and one high-speed USB 3.0 channel. Two serial ports support RS-232/-422/-485 interface levels with clock options up to 20 Mbps in the RS-422/-485 mode and up to 1 Mbps in the RS-232 mode.

The SBC35-CC405 series also includes two MiniPCIe connectors and one IO60 connector to enable additional I/O expansion. Both MiniPCIe connectors support half-length and full-length cards with screw-down mounting for improved shock and vibration durability. One MiniPCIe connector also supports bootable mSATA solid-state disks while the other connector includes USB. The IO60 connector provides access to the I2C, SPI, PWM, and UART signals enabling a simple interface to sensors, data acquisition, and other low-speed I/O devices.

The SBC35-CC405 runs over a 10-to-50-VDC input power range and operates at temperatures from –40°C to 85°C. Enclosures, power supplies, and configuration services are also available.

Linux, Windows, and other x86 OSes can be booted from the CFast, mSATA, SATA, or USB interfaces, providing flexible data storage options. WinSystems provides drivers for Linux and Windows 7/8 as well as preconfigured embedded OSes.
The single-core SBC35-CC405 costs $499.

Winsystems, Inc.

RS-232 Serial Adapter for Android Devices

ACCESSThe ANDROID-232 is a USB serial interface board that enables you to control legacy RS-232 devices from your Android devices. The board is well suited for POS, gaming systems, retail, hospitality, automation, kiosks, defense industries, lighting, or any other application requiring the connection of RS-232 serial devices to an Android-compatible system.

The ANDROID-232 uses the Android Open Accessory protocol to “convince” an Android device that its on-board USB port (normally limited to USB slave or OTG modes) is actually an RS-232 port. This two-way data port enables external hardware to control the Android unit or the Android unit to control external hardware.

The ANDROID-232’s key features include an Android USB 2.0 full-speed host-to-industry-standard RS-232 DB9M serial port; support for a UART interface with RX, TX, RTS, and CTS; a 5,512-byte RX buffer size; a 256-byte TX buffer size; ±15-kV ESD protection on USB data lines and all RS-232 signals; status and fault LEDs including external power, charging status, and USB status; a Type-A USB connector; a latching 5-V external power input connector with an external regulated power supply; a –40°C-to-85°C standard industrial operating temperature; and RoHS compliance.

The board includes an Android sample program with source code. This program enables you to verify proper operation of the ANDROID-232 device, including sending and receiving RS-232 data. The ANDROID-232’s Python test program can cooperate with the Android sample program to verify proper receipt of transmitted data.

The ANDROID-232 costs $139.

ACCES I/O Products, Inc.