New Development Tool for Bluetooth 5

Nordic Semiconductor’s Bluetooth 5 developer solution for its nRF52840 SoC comprises the Nordic S140 v5.0 multi-role, concurrent protocol stack that brings Bluetooth 5’s long range and high throughput modes for immediate use to developers on the Nordic nRF52840 SoC. The Nordic nRF5 SDK offers application examples that implement this new long-range, high-throughput functionality. The existing Nordic nRF52832 SoC is also complemented with a Bluetooth 5 protocol stack.NordicBluetooth5Board

Bluetooth 5’s high throughput mode offers not only new use cases for wearables and other applications, but also significantly improves user experience with Bluetooth products. Time on air is reduced and thus leads to faster more robust communication as well as reduced overall power consumption. In addition, with 2 Mbps, the prospect of audio over Bluetooth low energy is possible.

The new Preview Development Kit (nRF52840-PDK) is a versatile, single-board development tool for Bluetooth 5, Bluetooth low energy, ANT, 802.15.4m, and 2.4-GHz proprietary applications using the nRF52840 SoC. The kit is hardware compatible with the Arduino Uno Revision 3 standard, making it possible to use third-party-compatible shields. An NFC antenna can be connected to enable NFC tag functionality. The kit gives access to all I/O and interfaces via connectors and has four LEDs and four buttons which are user-programmable.

Source: Nordic Semiconductor

New Bluetooth 5-Ready SoC Offers Increased Range, Bandwidth, & Security

Nordic Semiconductor’s new Bluetooth 5-ready nRF52840 SoC is well suited for smart home, advanced wearables, and industrial IoT applications. In addition to supporting 802.15.4, it’s capable of delivering Bluetooth low energy (BLE) wireless connectivity with up to 4× the range or 2× the raw data bandwidth (2 Mbps) compared with the BLE implementation of Bluetooth 4.2Nordic nRF52840

The nRF52840 SoC’s features, specs, and benefits:

  • Features a 64-MHz, 32-bit ARM Cortex M4F processor employed on Nordic’s nRF52832 SoC
  • A new radio architecture with on-chip PA boosting output power considerably, and extending the link budget for “whole house” applications, a doubling of flash memory to 1 MB, and a quadrupling of RAM memory to 256 KB
  • Support for Bluetooth 5, 802.15.4, ANT, and proprietary 2.4-GHz wireless technologies
  • A full-speed USB 2.0 controller
  • A host of new peripherals (many with EasyDMA) including a quad-SPI
  • Operates from power supplies above 5 V  (e.g., rechargeable battery power sources)
  • Incorporates the ARM CryptoCell-310 cryptographic accelerator offering best-in-class security for Cortex-M based SoCs. Extensive crypto ciphers and key generation and storage options are also available.

Nordic released the S140 SoftDevice and associated nRF5 SDK with support for Bluetooth 5 longer range and high throughput modes in December 2016. Engineering samples and development kits are now available. Production variants of the nRF52840 will be available in Q4 2017.

Source: Nordic Semiconductor 

Battery-Free, Energy-Harvesting BLE Module Features nRF51822 SoC

EnOcean recently selected Nordic Semiconductor’s nRF51822 Bluetooth low energy SoC for its Dolphin PTM 215B pushbutton transmitter module, which is well suited for use in smart lighting applications. Using a miniaturize electro-dynamic energy transducer to convert motion, light, or temperature differences into electrical energy, the module is an excellent option for engineers designing flexible, energy-efficiency in smart building and IoT lighting applications.nordic nRF51822 EnOcean Dolphin

The nRF51822 was selected because harvested energy is sufficient to power wireless control of Bluetooth low energy peripherals such as smart light bulbs. A powerful multiprotocol SoC, nRF51822 is  built around a 32-bit ARM Cortex M0 CPU with 256/128 KB flash and 32/16 KB RAM. The embedded 2.4-GHz transceiver is fully compliant with Bluetooth 4.2.

Source: Nordic Semiconductor

Open-Source Bluetooth Low Energy Beacon

Nordic Semiconductor recently announced the availability on Kickstarter of a Nordic nRF52832 SoC-based Bluetooth low energy (BLE) beacon intended for Internet of Things (IoT) applications. You can program the Puck.js wirelessly from a website using a graphical editor or JavaScript instead of C or C++, which are traditionally used by Bluetooth low energy beacon developers.NS_PUCK Nordic

The open-source Puck.js supports both the iBeacon and Eddystone beacon formats and comes with firmware updates for the upcoming Bluetooth v5.0 specification. The circular 35-mm Puck.js has a silicone rubber cover and plastic base. Powered from a CR2032 coin cell battery, the Puck.js includes a magnetometer (digital compass), user-assignable tactile button, and four LEDs (red, green, blue, and infrared).

The Puck.js features an nRF52832 SoC, which means it benefits from a powerful ARM Cortex-M4F processor, 64-MHz clock speed, 64 KB of RAM, 512 KB of flash memory, built-in NFC, over-the-air firmware updates, a 12-bit ADC, timers, an SPI, a temperature sensor, and more.

Source: Nordic Semiconductor

Arduino Primo Features Nordic Semiconductor SoC

Nordic Semiconductor recently announced that Arduino’s new Arduino Primo features its nRF52832 Bluetooth low energy SoC. The IoT-targeted Arduino Primo PCB features native Bluetooth low energy wireless connectivity and includes Near Field Communication (NFC), Wi-Fi, and infrared (IR) technologies. In addition to being able to wirelessly connect to a wide array of Bluetooth low energy sensors, the Arduino Primo uses the nRF52832 SoC’s integrated NFC for secure authentication and Touch-to-Pair (a simple BLE pairing function requiring no user interaction), and has embedded IR for traditional remote control. Nordic_Arduino_Primo_PRINT

The Nordic nRF52832 SoC’s ARM processor has ample computational overhead to manage the Arduino Primo’s on-board accelerometer, temperature, humidity, and pressure sensors. The Nordic Semiconductor nRF52832’s features and specs include:

  • 64-MHz, 32-bit ARM Cortex-M4F processor
  • 2.4-GHz multiprotocol radio that’s fully compatible with the Bluetooth 4.2 specification and features –96-dB RX sensitivity and 5.5-mA peak RX/TX currents
  • 512-KB flash memory and 64-KB RAM, and a fully-automatic power management system to optimize power consumption.

You can program via the Arduino Integrated Development Environment (IDE) programming interface. If you want to access the Arduino Prio’s most advanced features and functionality, you can use any Nordic nRF52 Series-compatible Software Development Kit (SDK) or programming tools. For example, the nRF5 SDK for IoT enables you to develop IPv6 over Bluetooth low energy applications on the nRF52832 SoC.

Source: Nordic Semiconductor

Single-Board, Arduino Uno Shield-Compatible Dev Kit

Nordic Semiconductor’s new Arduino Uno shield-compatible nRF51 DK development kit supports Bluetooth Smart, ANT, and 2.4-GHz designs. Nordic also announced the availability of its nRF51 Dongle, which is a 16 mm × 28 mm USB dongle for the testing, analysis, and development of Bluetooth Smart, ANT, and 2.4-GHz applications.Nordic-nRF51 DK_1

The nRF51 DK is based on Nordic’s nRF51 Series SoC, which combines a 2.4-GHz multiprotocol radio, 32-bit ARM Corte M0 processor, flash memory, and 16- or 32-KB RAM. The SoCs can support a wide range of peripherals and are available in quad flat no-lead (QFN) and wafer level chip scale package (WLCSP) options.

Key points about the nRF51 DK and nRF51 Dongle

  • You can use the nRF51 DK with a variety of third-party Arduino shield expansion boards. It also supports ARM mbed for rapid prototyping projects.
  • The nRF51 DK allows access to all device peripherals, interfaces, and I/Os.
  • The nRF51 DK includes four user-programmable buttons and LEDS plus voltage and current pins to measure device power consumption.
  • nRF51 DK and nRF51 Dongle are supported by standard tool-chain options including Keil, IAR, and Gnu Compiler Collection (GCC).
  • The 63 mm × 101 mm nRF51 DK includes a coin-cell battery holder for field testing
  • You can use nRF51 DKhe DK as a programmer for other target boards that use the nRF51 Series SoC.

The nRF51 DK costs $69. The nRF51 Dongle is $49.

Source: Nordic Semiconductor