Motor Driver Provides Complete Solution for Industrial Designs

Infineon Technologies has launched the IFX007T NovalithIC motor driver for industrial applications. The IFX007T smart half-bridge provides an easy and efficient way to drive brushed and brushless motors, integrating a p-channel high-side MOSFET, an n-channel low-side MOSFET and a driver IC into one package. Along with a microcontroller and power supply, no other devices are necessary to drive a motor.

For many years, Infineon has followed this NovalithIC integrated approach for automotive applications. According to Infineon, the IFX007T now allows industrial system designers to benefit from this experience. It is qualified according to JESD47I and can be used to drive motors with supplies up to 40 V and peak currents up to 55 A. The broad application range includes pumps, healthcare, home and garden appliances as well as industrial automation, fans and many more.

Ease-of-use is a key benefit of the integrated solution. System designers save layout and manufacturing effort while reducing stray inductances and external components. Additionally, only three general purpose microcontroller pins are needed to control a full H-bridge.

The IFX007T has integrated self-protection, including over-temperature and cross-current protection. Within an H-bridge configuration, the half-bridge approach provides logic redundancy—if one device fails, the other can still stop the motor.

Another key benefit is the flexible motor control. The IFX007T can be used in either half-bridge, H-bridge or three-phase configurations. Furthermore, the motor speed can be adjusted via pulse width modulation (PWM) up to 25 kHz. Active freewheeling is possible from either the high side or the low side. An adjustable slew rate enables reduction of electromagnetic emissions.

Infineon Technologies | www.infineon.com

Motor Drivers Provide Solution for Low- to Mid-Power Applications

STMicroelectronics has released the STSPIN830 and STSPIN840 single-chip drivers that simplify the design of low-to-mid-power motor controls in the 7 V to 45 V range.  The devices contain flexible control logic and low-RDS(ON) power switches for industrial applications, medical technology, and home appliances.
The STSPIN830 for driving 3-phase brushless DC motors has a mode-setting pin that lets users control the three half bridges of the integrated power stage with direct U, V, and W pulse-width modulated (PWM) inputs, or by applying signals to each gate individually for higher control flexibility. A dedicated sense pin for each inverter leg simplifies setting up three-shunt or single-shunt current sensing for Field-Oriented Control (FOC).

The STSPIN840 can drive two brushed DC motors or one larger motor leveraging ST’s well- known, market-proven paralleling concept, which allows the integrated full bridges to be configured as two separate bridges or as a single bridge using the two sets of MOSFETs in parallel for lower RDS(ON) and higher current rating.

Both drivers contain rich features, including PWM current-control circuitry with adjustable off-time, a convenient standby pin for power saving, and protection circuitry including non-dissipative overcurrent protection, short-circuit protection, undervoltage lockout, thermal shutdown, and interlocking to help create robust and reliable drives.

The integrated power stage of each device features ST-proprietary MOSFETs with low RDS(ON) of only 500 mΩ to combine high efficiency with economy. The option to use the output bridges individually or connected in parallel, in the STSPIN840, helps trim the BOM for multi-motor applications.

With their high feature integration and flexibility, the drivers enable more compact and cost-effective controls for industrial, robotic, medical, building-automation, and office-equipment applications. The STSPIN830 is ideal for factory-automation end-points, home appliances, small pumps, and fans for computer or general-purpose cooling. The STSPIN840 targets ATM and money-handling machines, multi-axis stage-lighting mechanisms, thermal printers, textile or sewing machines, and vending machines.

The STSPIN830 and STSPIN840 are both in production now, as 4 mm x 4 mm QFN devices. Pricing for both starts from $1.25 for orders of 1,000 pieces.

Two STM32 Nucleo expansion boards are provided to facilitate product evaluation and build functional prototypes using the STM32 Open Development Environment: X-NUCLEO-IHM16M1 for the STSPIN830 and X-NUCLEO-IHM15A1 for the STSPIN840, both priced at $16.

STMicroelectronics | www.st.com