Two-Channel CW Laser Diode Driver with an MCU Interface

The iC-HT laser diode driver enables microcontroller-based activation of laser diodes in Continuous Wave mode. With this device, laser diodes can be driven by the optical output power (using APC), the laser diode current (using ACC), or a full controller-based power control unit.

The maximum laser diode current per channel is 750 mA. Both channels can be switched in parallel for high laser diode currents of up to 1.5 A. A current limit can also be configured for each channel.

Internal operating points and voltages can be output through ADCs. The integrated temperature sensor enables the system temperature to be monitored and can also be used to analyze control circuit feedback. Logarithmic DACs enable optimum power regulation across a large dynamic range. Therefore, a variety of laser diodes can be used.

The relevant configuration is stored in two equivalent memory areas. Internal current limits, a supply-voltage monitor, channel-specific interrupt-switching inputs, and a watchdog safeguard the laser diodes’ operation through iC-HT.

The device can be also operated by pin configuration in place of the SPI or I2C interface, where external resistors define the APC performance targets. An external supply voltage can be controlled through current output device configuration overlay (DCO) to reduce the system power dissipation (e.g., in battery-operated devices or systems).

The iC-HT operates on 2.8 to 8 V and can drive both blue and green laser diodes. The diode driver has a –40°C-to-125°C operating temperature range and is housed in a 5-mm × 5-mm, 28-pin QFN package.

The iC-HT costs $13.20 in 1,000-unit quantities.

iC-Haus GmbH
www.ichaus.com

AAR Arduino Autonomous Mobile Robot

The AAR Arduino Robot is a small autonomous mobile robot designed for those new to robotics and for experienced Arduino designers. The robot is well suited for hobbyists and school projects. Designed in the Arduino open-source prototyping platform, the robot is easy to program and run.

The AAR, which is delivered fully assembled, comes with a comprehensive CD that includes all the software needed to write, compile, and upload programs to your robot. It also includes a firmware and hardware self test. For wireless control, the robot features optional Bluetooth technology and a 433-MHz RF.

The AAR robot’s features include an Atmel ATmega328P 8-bit AVR-RISC processor with a 16-MHz clock, Arduino open-source software, two independently controlled 3-VDC motors, an I2C bus, 14 digital I/Os on the processor, eight analog input lines, USB interface programming, an on-board odometer sensor on both wheels, a line tracker sensor, and an ISP connector for bootloader programming.

The AAR’s many example programs help you get your robot up and running. With many expansion kits available, your creativity is unlimited.

Contact Global Specialties for pricing.

Global Specialties
http://globalspecialties.com