The iC-HT laser diode driver enables microcontroller-based activation of laser diodes in Continuous Wave mode. With this device, laser diodes can be driven by the optical output power (using APC), the laser diode current (using ACC), or a full controller-based power control unit.
The maximum laser diode current per channel is 750 mA. Both channels can be switched in parallel for high laser diode currents of up to 1.5 A. A current limit can also be configured for each channel.
Internal operating points and voltages can be output through ADCs. The integrated temperature sensor enables the system temperature to be monitored and can also be used to analyze control circuit feedback. Logarithmic DACs enable optimum power regulation across a large dynamic range. Therefore, a variety of laser diodes can be used.
The relevant configuration is stored in two equivalent memory areas. Internal current limits, a supply-voltage monitor, channel-specific interrupt-switching inputs, and a watchdog safeguard the laser diodes’ operation through iC-HT.
The device can be also operated by pin configuration in place of the SPI or I2C interface, where external resistors define the APC performance targets. An external supply voltage can be controlled through current output device configuration overlay (DCO) to reduce the system power dissipation (e.g., in battery-operated devices or systems).
The iC-HT operates on 2.8 to 8 V and can drive both blue and green laser diodes. The diode driver has a –40°C-to-125°C operating temperature range and is housed in a 5-mm × 5-mm, 28-pin QFN package.
The iC-HT costs $13.20 in 1,000-unit quantities.