Secure Wi-Fi MCU Provides IoT Connectivity Solution

Espressif Systems has announced the release of the ESP32-S2 Secure Wi-Fi MCU, a highly integrated, low-power, 2.4 GHz Wi-Fi SoC supporting Wi-Fi HT40 and 43 GPIOs. Based on the Xtensa single-core 32-bit LX7 processor, ESP32-S2 can be clocked at up to 240 MHz.

With state-of-the-art power management and RF performance, IO capabilities and security features, ESP32-S2 is well suited for a wide variety of IoT or connectivity-based applications, including smart home and wearables. With an integrated 240 MHz Xtensa core, ESP32-S2 is sufficient for building the most demanding connected devices without requiring external MCUs.

Features:

  • CPU and Memory
    • Xtensa single-core 32-bit LX7 microcontroller
    • 7-stage pipeline
    • Clock frequency of up to 240 MHz
    • Ultra-low-power co-processor
    • 320 kB SRAM, 128 kB ROM, 16 KB RTC memory
    • External SPIRAM (128 MB total) support
    • Up to 1 GB of external flash support
    • Separate instruction and data cache
  • Connectivity
    • Wi-Fi 802.11 b/g/n
    • 1×1 transmit and receive
    • HT40 support with data rate up to 150 Mbps
    • Support for TCP/IP networking, ESP-MESH networking, TLS 1.0, 1.1 and 1.2 and other networking protocols over Wi-Fi
    • Support Time-of-Flight (TOF) measurements with normal Wi-Fi packets
  • IO Peripherals
    • 43 programmable GPIOs
    • 14 capacitive touch sensing IOs
    • Standard peripherals including SPI, I2C, I2S, UART, ADC/DAC and PWM
    • LCD (8-bit parallel RGB/8080/6800) interface and also support for 16/24-bit parallel
    • Camera interface supports 8 or 16-bit DVP image sensor, with clock frequency of up to 40 MHz
    • Full speed USB OTG support
  • Security
    • RSA-3072-based trusted application boot
    • AES256-XTS-based flash encryption to protect sensitive data at rest
    • 4096-bit eFUSE memory with 2048 bits available for application
    • Digital signature peripheral for secure storage of private keys and generation of RSA signatures
  • Power Consumption
    • ESP32-S2 supports fine resolution power control through a selection of clock frequency, duty cycle, Wi-Fi operating modes and individual power control of its internal components.
    • When Wi-Fi is enabled, the chip automatically powers on or off the RF transceiver only when needed, thereby reducing the overall power consumption of the system.
    • ULP co-processor with less than 5 uA idle mode and 24 uA at 1% duty-cycle current consumption. Improved Wi-Fi-connected and MCU-idle-mode power consumption.
  • Software
    • ESP32-S2 supports Espressif’s software development framework (ESP-IDF), which is a mature and production-ready platform, already used by millions of devices deployed in the field. Availability of common cloud connectivity agents and common product features shortens the time to market.

Engineering samples of ESP32-S2 beta are available this month (June).

Espressif Systems | www.espressif.com

ADVERTISMENT