960 W DIN Rail Supply Boasts 95% Efficiency

TDK has announced the addition of a 960 W rated model to its DRF series of AC-DC DIN rail mount power supplies. The high 95% efficiency produces less internal waste heat enabling electrolytic capacitors to run cooler, providing a calculated life of in excess of eleven years with a 75% load at 230Vac input. The unit can supply a peak load of 1440W (24V 60A) for up to 4 seconds to power capacitive and inductive loads. Applications include industrial process control, factory automation, and test and measurement equipment.The power supply has a 24 V output, adjustable from 24 V to 28 V, using either the front panel mounted trim potentiometer or an external 5 to 6V source. The input range is 180 to 264 VAC, withstanding surges of up to 300 VAC for 5 seconds. The operating ambient temperature is -25°C to +70oC, -40°C cold start, derating linearly above 50°C to 75% load at 70°C. The DRF series warranty is five years.

The DRF960-24-1 is 123.4 mm tall, 139 mm deep and has a narrow 110 mm width saving both space on the rail and in the cabinet. Remote on/off and a 30 V 1 A rated DC OK relay contact are provided as standard. When in standby mode using the remote on/off function, the power consumption is less than 1 W. Up to five units can be connected in parallel using the droop mode current share, for systems requiring additional power.

Input to output isolation is 3,000 VAC, input to ground 1500 VAC and output to ground 500 VAC. The DRF960 is certified to the safety standards of IEC/UL/CSA/EN 60950-1, UL508 and is CE marked in accordance to the Low Voltage, EMC and RoHS Directives. The unit is compliant to EN 55032-B (radiated and conducted emissions), EN 61000-3-2 harmonics and IEC 61000-4 immunity standards.

TDK-Lambda | www.tdk-lambda.com

 

ADVERTISMENT