The Raspberry Pi is a computer with no casing, no keyboard, no hard disk and no screen. Despite all that, it’s taking the world by storm!
Get your free Raspberry Pi poster now, courtesy of Elektor, RS Components, and CC! Go ahead: download, print, and then enjoy!
RASPBERRY PI ESSENTIALS
Model A has 256-MB RAM, one USB port, and no Ethernet port (network connection). Model B has 512-MB RAM, two USB ports, and an Ethernet port.
The Raspberry Pi Model B, revision 2 board:
- Status led labels: top led has label “ACT” and bottom led has label “100”
- Header P2 is not populated
- The text underneath the Raspberry Pi logo reads: “(C) 2011,12”
- The area next to the micro usb port has CE and FCC logos and the text “Made in China or UK” along the board edge.
- There are two 2.9-mm holes in the PCB, which can be used as mounting holes.
- P5 is a new GPIO header with four additional GPIO pins and four power pins. Also note that some pin and I2C port numbers of connector P1 have been modified between revisions!
- Header P6 (left from the HDMI port) was added, short these two pins to reset the computer or wake it up when powered down with the “sudo halt” command.
The Raspberry Pi measures 85.60 mm × 56 mm × 21 mm, with a little overlap for the SD card and connectors which project over the edges. It weighs 45 g.
The SoC is a Broadcom BCM2835. This contains an ARM ARM1176JZFS, with floating point, running at 700 MHz, and a Videocore 4 GPU. The GPU is capable of BluRay quality playback, using H.264 at 40 Mbps. It has a fast 3D core which can be accessed using the supplied OpenGL ES2.0 and OpenVG libraries.
The Raspberry Pi is capable of using hardware acceleration for MPEG-2 and VC-1 playback, but you’ll need to buy license keys at the Raspberry Pi Store to unlock this functionality.
Which programming languages can you use? Python, C/C++, Perl, Java, PHP/MySQL, Scratch, and many more that can run under Linux.
If you’re getting a flashing red PWR LED or random restarts during the booting process, it’s likely that your PSU or USB cable has problems. The Raspberry Pi is pretty picky and requires a solid 5-V/1000-mA power supply. For other issues and more troubleshooting tips check out the extensive overview at the eLinux website
Circuitcellar.com is an Elektor International Media website.
© 2013, Circuit Cellar Administrator. All rights reserved.