Got Problematic Little Bits? (EE Tip #142)

While testing a project, something strange happened (see the nearby image). The terminal showed nonsense, but the logic analyzer properly displayed “Elektor” in ASCII. The latter also indicated that the UART was operating at 4800 baud instead of the 19200 baud that I had programmed (at least that’s what I thought), a difference with a factor of four. The change I had made in my code was a fourfold increase in the clock speed of the dsPIC. The conclusion I had to arrive at is that the clock speed was not being changed. But why not?

Source: Raymond Vermeulen (Elektor, October 2011)

Source: Raymond Vermeulen (Elektor, October 2011)

The inspiration came, and where else, in the shower. In a hobby project, I had used an ATmega32u4 with a bootloader whose only limitation was being unable to program the fuse bits. “That’s not going to be…” I was thinking. But yes, the bootloader I used in my dsPIC cannot program the configuration bits either. Experienced programmers would have realized that long ago, but we all have our off-days. (The solution is to use a “real” programmer, such as the ICD3).—By Raymond Vermeulen (Elektor Labs, Elektor, October 2011)

 

Comments are closed.