Wireless Data Control for Remote Sensor Monitoring

Circuit Cellar has published dozens of interesting articles about handy wireless applications over the years. And now we have another innovative project to report about. Circuit Cellar author Robert Bowen contacted us recently with a link to information about his iFarm-II controller data acquisition system.

The iFarm-II controller data acquisition system (Source: R. Bowen)

The design features two main components. Bowen’s “iFarm-Remote” and the “iFarm-Base controller” work together to as an accurate remote wireless data acquisition system. The former has six digital inputs (for monitoring relay or switch contacts) and six digital outputs (for energizing a relay’s coil). The latter is a stand-alone wireless and internet ready controller. Its LCD screen displays sensor readings from the iFarm-Remote controller. When you connect the base to the Internet, you can monitor data reading via a browser. In addition, you can have the base email you notifications pertaining to the sensor input channels.

You can connect the system to the Internet for remote monitoring. The Network Settings Page enables you to configure the iFarm-Base controller for your network. (Source: R. Bowen)

Bowen writes:

The iFarm-II Controller is a wireless data acquisition system used to remotely monitor temperature and humidity conditions in a remote location. The iFarm consists of two controllers, the iFarm-Remote and iFarm-Base controller. The iFarm-Remote is located in remote location with various sensors (supports sensors that output +/-10VDC ) connected. The iFarm-Remote also provides the user with 6-digital inputs and 6-digital outputs. The digital inputs may be used to detect switch closures while the digital outputs may be used to energize a relay coil. The iFarm-Base supports either a 2.4GHz or 900Mhz RF Module.

The iFarm-Base controller is responsible for sending commands to the iFarm-Remote controller to acquire the sensor and digital input status readings. These readings may be viewed locally on the iFarm-Base controllers LCD display or remotely via an Internet connection using your favorite web-browser. Alarm conditions can be set on the iFarm-Base controller. An active upper or lower limit condition will notify the user either through an e-mail or a text message sent directly to the user. Alternatively, the user may view and control the iFarm-Remote controller via web-browser. The iFarm-Base controllers web-server is designed to support viewing pages from a PC, Laptop, iPhone, iTouch, Blackberry or any mobile device/telephone which has a WiFi Internet connection.—Robert Bowen, http://wireless.xtreemhost.com/

iFarm-Host/Remote PCB Prototype (Source: R. Bowen)

Robert Bowen is a senior field service engineer for MTS Systems Corp., where he designs automated calibration equipment and develops testing methods for customers involved in the material and simulation testing fields. Circuit Cellar has published three of his articles since 2001:

Comments are closed.