Nesit

NESIT wants to create, educate, and foster learning in the fields of various technological and other disciplines. They reap the benefits of productivity through volunteer collaboration.

Location 290 Pratt St., Meriden CT 06450
Members 30
Website nesit.org

Read about what Vice President Will Genovese has to say about NESIT.
Tell us about your meeting space!

NESIT meets in a 4000 square feet office that takes place in The Meriden Enterprise Center. A large office and manufacturing building that is home to over 60 businesses.

What tools do you have in your space? 

Soldering stations, oscilloscope, 3-D printer, woodshop, cnc, and a data center.

Are there any tools your group really wants or needs?

A lasercutter would be a nice addition to our arsenal.

What sort of embedded tech does your Hackerspace work with?

We work with PIC, Arduino, and Raspberry Pi, and many more.
In fact one of our recent projects was a DIY PIC Programmer.

Can you tell us about some of your group’s recent tech projects?

1012388_631853183518705_1732534179_n

One of the group’s first tech projects was the “MAME,” a full-size gaming arcade. The project was going well until there was a break in at the location and they lost some equipment; the MAME was put on the backburner.  After they moved to their new location and gained a new member, an art teacher named John, the project garnered interest again. He came up with the design for it. Afterwords it was painted, they got a coin mechanism, speakers were hooked up, and the software was installed and configured. IT was finally finished.

Click here if you want to check it out.

What’s the craziest project you’ve completed?

At the moment we have not yet completed projects I would categorize as “crazy.”

Read more about NESIT on their website. 

Show us your hackerspace! Tell us about your group! Where does your group design, hack, create, program, debug, and innovate? Do you work in a 20′ × 20′ space in an old warehouse? Do you share a small space in a university lab? Do you meet at a local coffee shop or bar? What sort of electronics projects do you work on? Submit your hackerspace and we might feature you on our website!

Artisan’s Asylum

Artisan’s Asylum in Somerville, MA has the mission to promote and support the teaching, learning, and practicing of all varieties. Soumen Nandy is the Front Desk, General Volunteer, and Village Idiot of Artisan’s Asylum and she decided to tell us a little bit more about it.

1554402_785223821501448_2405207992407776899_n-artisansasylum

Photo courtesy of Artisan’s Asylum Facebook page

Location 10 Tyler St
Somerville, MA 02143
Members 400 active members
Website artisansasylum.com

Tell us about your meeting space!

We have around 40,000 sq. ft. that includes more than 150 studio spaces ranging from 50 sq. ft. to 200+ sq. ft. Our storage includes: lockers, 2 x 2 x 2 rack space, 40″ x 44″ pallets (up to 10′ tall), flexspace and studios. We have a truck-loading dock and a rail stop — yup, entire trains can pull up to our back doors for delivery. Can any other Maker Space say that? We also host a large roster of formal training courses in practical technologies, trades, crafts and arts, to help our members and the general community learn skills, and increase their awesomeness. (And not incidentally: become certified to safely use our gear.)

What are you working with?

Fully equipped wood, metal, machine, robotics, electronics, jewelry/glass shops, 12 sewing stations,  computer lab with all major professional modeling, CNC, and simulation packages (via direct partnerships with the respective companies). Multiple types of 3D printers, laser cutters, CNC routers, lathes, mills, etc. Too much more to list; if the Asylum doesn’t own/lease it, often a member, their business, or an institutional member can get it from you or get you access. And yet, it’s never enough.

Are there any tools your group really wants or needs?

Quite a few things, but it’s a delicate balance between sustainable operations, growth and space for member studios vs. facilities. We’ve spun off or attracted many companies, so the empty factory complex we moved into (until recently the worlds largest envelope factory) has almost completely filled up.

Does your group work with embedded tech (Arduino, Raspberry Pi, embedded security, MCU-based designs, etc.)?

Many of our members do. The group itself is too diverse to easily characterize.

What has your group been up to?

10464004_508974359203723_530424612314997460_n-artisanasylum-hexapod2

Hanging with a giant robot. (Courtesy of https://www.facebook.com/ProjectHexapod)

We’re not purely a technological space. We have artists, artisans, tradespesons, crafters, hobbyists, and technologists. I know of at least two-million dollar Kickstarters that launched from here. Hmmm… How about the 18-foot wide rideable-hexapod robot that’s nearing conclusion (we call it “Stompy“) or the 4′ x 8′ large format laser cutter that should be operational any day now? These are just some notably big projects, not necessarily our most awesome.

Oh, wait. we did an Ides of March Festival, dressing up Union Square as a Roman Forum.

What’s the craziest project your group or group members have completed?

Well, a few weeks ago, I went home at 10 PM, and woke to a tweeted photo announcing that this had been built in our social area; It’s actually not among our most surprising events, but it has reappeared several times since (fast dis/assembly), and a reporter caught it once. I just happened to receive this link a couple of hours ago, so it was handy to forward to you. We do a lot of art and participation projects around Boston.

What does Artisan’s social calendar look like these days?

Too many events to list! We’re really looking to stabilize our base, seek congruent funding donors (we are a non-profit, but thus far have mostly run on internally-earned income). I’d be happy to arrange an interview with one of our honchos if you like—the goings-ons around here are really too much to fit in one brain. Those of us who give tours actually regularly take each other’s tours to learn stuff about the place we never knew.

What would you like to say to fellow hackers out there?

Keep getting awesomer. We love you!

Also, any philanthropists out there? Our members and facilities could be an excellent way to multiply your awesome impact.

Keep up with Artisan’s Asylum! Check out their website!

Show us your hackerspace! Tell us about your group! Where does your group design, hack, create, program, debug, and innovate? Do you work in a 20′ × 20′ space in an old warehouse? Do you share a small space in a university lab? Do you meet at a local coffee shop or bar? What sort of electronics projects do you work on? Submit your hackerspace and we might feature you on our website!

TinkerMill, where they share knowledge, lots of knowledge!

TM-Bothsides-1024x763

TinkerMill is a Hacker/Makerspace from Longmont, CO. Where like-minded people get together and collaborate on anything art, technology, science, and business related.

Scott Converse is the founder of TinkerMill and tells us about the organization.

Location 1250 S. Hover #49, Longmont, CO 80501
Members 65
Website tinkermill.org

What’s your meeting space like? 

Our workshop is over 6,500 square feet and we also have an office space.

What tools do you have in your space? 

  • Electronics
  • PCB board design
  • Robotics
  • Soldering stations
  • Woodworking shop
  • Metalworking shop
  • Welding shop
  • Rapid Prototyping
  • Lab (CNC, Lastercutter, 3D Printers)
  • Brewery & Distillery
  • Jewelry
  • Datacenter
  • And many more…

IMG_20140110_191201-tinkermill

Are there any tools your group really wants or needs?

Any PCB and pick/play stuff. Also some electronics supplies would be nice.

Does your group work with embedded tech like Arduino, Raspberry Pi, embedded security, or MCU-based designs?

We work with Arduino and Raspberry Pi a lot. Embedded stuff comes along quite often. For example we also work with Nvidia’s Jetson TK1 board, oDroid boards, and Parallella boards.

What are some of the projects your group has been working on?

We just did the Denver Mini Maker Faire. We also built a Tesla coil and we have about a dozen of other projects, which you can all find on our website.

What’s the craziest project your group or group members have completed?

For our craziest project so far I must say it was the 15 foot human-powered Ferris wheel. This was a great project!

What would you like to say to fellow hackers out there?

Come on down and BUILD something with us!

Want to know more about TinkerMill? Make sure to check out their website!

Show us your hackerspace! Tell us about your group! Where does your group design, hack, create, program, debug, and innovate? Do you work in a 20′ × 20′ space in an old warehouse? Do you share a small space in a university lab? Do you meet at a local coffee shop or bar? What sort of electronics projects do you work on? Submit your hackerspace and we might feature you on our website!

HackRVA: They provide the tools, you provide the enthusiasm

HackRVA Sign4HackRVA is a Richmond-based makerspace. They like to take things apart, put them back together, figure out how they work, and create new things. Their mission? To learn and make stuff sharing tools and knowledge in technology; including Arduino, Makerbot, Linux, and the Open Source movement.

Aaron Nipper will tell us a little more.

Location 1600 Roseneath Road, Suite E, Richmond, VA 23230
Members 65
Website www.hackrva.org

What’s your meeting space like? 

Our space is about 2,000 square feet. We have an AV and general meeting area, a tech lab, and a fab lab.

What’s in your “toolbox”?

  • Two 3D printers
  • Laser cutter
  • Lots of soldering stations
  • O-scopes
  • Hand and power tools
  • A computer lab

Are there any tools your group really wants or needs?

A CNC Router — like a shopbot. Can’t wait to build that first wiki-house!

Arduino, Raspberry Pi, embedded security… which embedded technologies does your group work with most frequently? 

We use all that stuff. Arduino, R-Pi, whatever we can get our hands on! We’ve designed, from scratch, PCB Badges for RichSec security conference the last three years. Click here to learn more about the PCB Badges project.

What have you been working on lately?

For the past three years, we’ve designed those PCB badges for the RichSec security conference. Here’s another recent build where a member took a Power Wheels and made it Xbox controller driven. Check out the video below or click here to read more about that project.

Do you have any events or initiatives you’d like to tell us about? Where can we learn more about them?

You can learn more about us at hackrva.org. We host the Richmond Maker Guild, have regular Saturday Hackathons, as well as a Noise Night. Members are always coming up with creative events!

Any words of advice for fellow hackers?

My personal motto is fail often, teach others, and post to the web. All those things help me learn and think about projects better.

Want to know more about what HackRVA does? Check out their Facebook page and website.

Show us your hackerspace! Tell us about your group! Where does your group design, hack, create, program, debug, and innovate? Do you work in a 20′ × 20′ space in an old warehouse? Do you share a small space in a university lab? Do you meet a local coffee shop or bar? What sort of electronics projects do you work on? Submit your hackerspace and we might feature you on our website!

Denhac — Hackerspace meets classroom for technology, art, and engineering

Denhac is a hackerspace on a mission to create and sustain a local, community driven, shared space, that enables education, experimentation, and collaboration, by applying the spirit of DIY to science, technology, engineering, and art.

Location 975 E 58th Ave, Unit N Denver, CO 80216
Members 45
Website Denhac.org

Alpha One Labs

What’s your meeting space like? 

It’s about 2,500 sq. ft. of commercial/warehouse/workshop space. We have an open shop floor area, bay doors, a classroom, an air-conditioned server room, and floorspace for several workstations specializing in various DIY areas.

What tools do you have in your space? 

  • Small OpenStack driven data center (four 72″ racks)
  • Cisco Networking workstation (for learning network engineering and infosec activities)
  • Textile workstation (sewing machines and USB driven embroidery machine) used for costuming, cosplay creation, etc.
  • 3D Printer workstation with Lulzbot printer
  • SeeMeCNC large format printer
  • Electronics workstation with oscilloscopes, breadboards, components, testing equipment, etc.
  • Soldering station
  • Small tools workstation (grinders, dremels, etc.),
  • Large format printer workstation,
  • Lasercutter (100watt),
  • Internet radio station (www.denhacradio.org) with a group going for a Low Power FM license (for running a community radio station)
  • Lots of racks for servers
  • 100 MB Internet

Are there any tools your group really wants or needs?

A metal forge, welding gear, carpentry gear, and CNC Tools.

Does your group work with embedded tech like Arduino, Raspberry Pi, embedded security, or MCU-based designs?

Yes, we teach classes on all of these (and more).

What are some of the projects your group has been working on?

Many and few, lots of individual projects. The group focuses more on collecting great tools for it’s members, and teaching classes on a broad range of topics (from making costumes, to hacking Arduino’s, to synthetic biology DNA hacking with bioblocks).

What’s the craziest project your group or group members have completed?

9′ Tesla coil. Also, a Steampunk flamethrower.

You mentioned a Low Power FM group earlier, can you tell us more about it? Are there other events or initiatives you’d like to talk about?

Yes, we’re just starting up a Low Power FM (LPFM) group that will be applying for a license to set up and run an FM community radio station at Denhac. We started a weekly Kids Coding Dojo class that teaches kids from ages six to fifteen how to code. (Accompanied by their parents.) We have a software defined radio hacking group (Radio Heads) that uses programs like GNUradio with SDR-capable radio kits and dongles to ‘listen in’ on the world. A BIG antenna is needed for that! We have a LockSport group that meets monthly and has some expert lock pickers. We have a 3D and LaserCutter printer group that meets as needed to teach members and the public how to use the equipment and to trade ideas on what to make next.

What would you like to say to fellow hackers out there?

Come and visit! We love visitors.

Want to know more about Denhac? Make sure to check out their website!

Show us your hackerspace! Tell us about your group! Where does your group design, hack, create, program, debug, and innovate? Do you work in a 20′ × 20′ space in an old warehouse? Do you share a small space in a university lab? Do you meet a local coffee shop or bar? What sort of electronics projects do you work on? Submit your hackerspace and we might feature you on our website!