Check Your PCB Design Online Before Ordering

Did you know Circuit Cellar’s parent company, Elektor, offers a standard PCB service? The PCB service was originally launched in 2009, and since then more than 3,000 users have been registered.

Who will benefit from the service? Ask yourself: Are you an electronics designer who occasionally designs a PCB and then sends it off to a PCB manufacturing house? If so, you’re likely familiar with that nagging feeling of uncertainty about the correctness of your production files. Did you check the Gerber files you uploaded? Are you sure that the PCB manufacturing house will interpret your board data properly?

The PCB Visualizer and Checker is a fully automated interactive web tool that enables you to review your design files before ordering the PCB. After uploading your design files, the tool analyzes them and shows you what the manufacturer sees. Possible design issues are highlighted and you’re provided insight into critical areas of the PCB production process. Your design is verified against your board specifications, and you’re provided a list of the modifications needed to get it ready for production. Finally, the visualizer renders the board as it will be shipped before production has even started!

For more information, check out the latest addition to the Elektor CircuitCellar PCB Service.

DIY Green Energy Design Projects

Ready to start a low-power or energy-monitoring microcontroller-based design project? You’re in luck. We’re featuring eight award-winning, green energy-related designs that will help get your creative juices flowing.

The projects listed below placed at the top of Renesas’s RL78 Green Energy Challenge.

Electrostatic Cleaning Robot: Solar tracking mirrors, called heliostats, are an integral part of Concentrating Solar Power (CSP) plants. They must be kept clean to help maximize the production of steam, which generates power. Using an RL78, the innovative Electrostatic Cleaning Robot provides a reliable cleaning solution that’s powered entirely by photovoltaic cells. The robot traverses the surface of the mirror and uses a high voltage AC electric field to sweep away dust and debris.

Parts and circuitry inside the robot cleaner

Cloud Electrofusion Machine: Using approximately 400 times less energy than commercial electrofusion machines, the Cloud Electrofusion Machine is designed for welding 0.5″ to 2″ polyethylene fittings. The RL78-controlled machine is designed to read a barcode on the fitting which determines fusion parameters and traceability. Along with the barcode data, the system logs GPS location to an SD card, if present, and transmits the data for each fusion to a cloud database for tracking purposes and quality control.

Inside the electrofusion machine (Source: M. Hamilton)

The Sun Chaser: A GPS Reference Station: The Sun Chaser is a well-designed, solar-based energy harvesting system that automatically recalculates the direction of a solar panel to ensure it is always facing the sun. Mounted on a rotating disc, the solar panel’s orientation is calculated using the registered GPS position. With an external compass, the internal accelerometer, a DC motor and stepper motor, you can determine the solar panel’s exact position. The system uses the Renesas RDKRL78G13 evaluation board running the Micrium µC/OS-III real-time kernel.

[Video: ]

Water Heater by Solar Concentration: This solar water heater is powered by the RL78 evaluation board and designed to deflect concentrated amounts of sunlight onto a water pipe for continual heating. The deflector, armed with a counterweight for easy tilting, automatically adjusts the angle of reflection for maximum solar energy using the lowest power consumption possible.

RL78-based solar water heater (Source: P. Berquin)

Air Quality Mapper: Want to make sure the air along your daily walking path is clean? The Air Quality Mapper is a portable device designed to track levels of CO2 and CO gasses for constructing “Smog Maps” to determine the healthiest routes. Constructed with an RDKRL78G13, the Mapper receives location data from its GPS module, takes readings of the CO2 and CO concentrations along a specific route and stores the data in an SD card. Using a PC, you can parse the SD card data, plot it, and upload it automatically to an online MySQL database that presents the data in a Google map.

Air quality mapper design (Source: R. Alvarez Torrico)

Wireless Remote Solar-Powered “Meteo Sensor”: You can easily measure meteorological parameters with the “Meteo Sensor.” The RL78 MCU-based design takes cyclical measurements of temperature, humidity, atmospheric pressure, and supply voltage, and shares them using digital radio transceivers. Receivers are configured for listening of incoming data on the same radio channel. It simplifies the way weather data is gathered and eases construction of local measurement networks while being optimized for low energy usage and long battery life.

The design takes cyclical measurements of temperature, humidity, atmospheric pressure, and supply voltage, and shares them using digital radio transceivers. (Source: G. Kaczmarek)

Portable Power Quality Meter: Monitoring electrical usage is becoming increasingly popular in modern homes. The Portable Power Quality Meter uses an RL78 MCU to read power factor, total harmonic distortion, line frequency, voltage, and electrical consumption information and stores the data for analysis.

The portable power quality meter uses an RL78 MCU to read power factor, total harmonic distortion, line frequency, voltage, and electrical consumption information and stores the data for analysis. (Source: A. Barbosa)

High-Altitude Low-Cost Experimental Glider (HALO): The “HALO” experimental glider project consists of three main parts. A weather balloon is the carrier section. A glider (the payload of the balloon) is the return section. A ground base section is used for communication and display telemetry data (not part of the contest project). Using the REFLEX flight simulator for testing, the glider has its own micro-GPS receiver, sensors and low-power MCU unit. It can take off, climb to pre-programmed altitude and return to a given coordinate.

High-altitude low-cost experimental glider (Source: J. Altenburg)

Elektor & element14 Partner for Embedded Linux Webinar at Electronica 2012

Want to learn more about Embedded Linux? You’re in luck. On Wednesday, November 14, Elektor and Farnell/element14 will partner to run an informative webinar on the topic at Electronica 2012 in Munich, Germany. If you’re at the show, you can attend the recordings for free. Register before October 31 to get free Electronica entry tickets from Farnell/element14.

Attendees should go to the Farnell/element14 stand (Hall 5, Stand 558) for the Elektor Academy seminar, which will focus on the latest developments on the innovative Embedded Linux board. You can watch the presentation and ask the experts questions. The webinar will be recorded and webcast a bit later.

  • Presenter: Embedded Linux expert Benedict Sauter, the board’s designer
  • Description: Benedict Sauter will take you through the design and update us on the latest applications.
  • When: Wed, November 14, 2012
  • Time: 11:30 CET
  • Where: Farnell element14 stand (Messe München, Hall 5, Booth 558)
  • Language: English

Visit the element14 page about the Elektor Academy event for more information and to register for a free entry ticket.

CircuitCellar.com is an Elektor International Media publication.

CC268: The History of Embedded Tech

At the end of September 2012, an enthusiastic crew of electrical engineers and journalists (and significant others) traveled to Portsmouth, NH, from locations as far apart as San Luis Obispo, CA,  and Paris, France, to celebrate Circuit Cellar’s 25th anniversary. Attendees included Don Akkermans (Director, Elektor International Media), Steve Ciarcia (Founder, Circuit Cellar), the current magazine staff, and several well-known engineers, editors, and columnists. The event marked the beginning of the next chapter in the history of this long-revered publication. As you’d expect, contributors and staffers both reminisced about the past and shared ideas about its future. And in many instances, the conversations turned to the content in this issue, which was at that time entering the final phase of production. Why? We purposely designed this issue (and next month’s) to feature a diversity of content that would represent the breadth of coverage we’ve come to deliver during the past quarter century. A quick look at this issue’s topics gives you an idea of how far embedded technology has come. The topics also point to the fact that some of the most popular ’80s-era engineering concerns are as relevant as ever. Let’s review.

In the earliest issues of Circuit Cellar, home control was one of the hottest topics. Today, inventive DIY home control projects are highly coveted by professional engineers and newbies alike. On page 16, Scott Weber presents an interesting GPS-based time server for lighting control applications. An MCU extracts time from GPS data and transmits it to networked devices.

The time-broadcasting device includes a circuit board that’s attached to a GPS module. (Source: S. Weber, CC268)

Thiadmer Riemersma’s DIY automated component dispenser is a contemporary solution to a problem that has frustrated engineers for decades (p. 26). The MCU-based design simplifies component management and will be a welcome addition to any workbench.

The DIY automated component dispenser. (Source: T. Riemersma, CC268)

USB technology started becoming relevant in the mid-to-late 1990s, and since then has become the go-to connection option for designers and end users alike. Turn to page 30 for Jan Axelson’s  tips about debugging USB firmware. Axelson covers controller architectures and details devices such as the FTDI FT232R USB UART controller and Microchip Technology’s PIC18F4550 microcontroller.

Debugging USB firmware (Source: J. Axelson, CC268)

Electrical engineers have been trying to “control time” in various ways since the earliest innovators began studying and experimenting with electric charge. Contemporary timing control systems are implemented in a amazing ways. For instance, Richard Lord built a digital camera controller that enables him to photograph the movement of high-speed objects (p. 36).

Security and product reliability are topics that have been on the minds of engineers for decades. Whether you’re working on aerospace electronics or a compact embedded system for your workbench (p. 52), you’ll want to ensure your data is protected and that you’ve gone through the necessary steps to predict your project’s likely reliability (p. 60).

The issue’s last two articles detail how to use contemporary electronics to improve older mechanical systems. On page 64 George Martin presents a tachometer design you can implement immediately in a machine shop. And lastly, on page 70, Jeff Bachiochi wraps up his series “Mechanical Gyroscope Replacement.” The goal is to transmit reliable data to motor controllers. The photo below shows the Pololu MinIMU-9.

The Pololu MinIMU-9’s sensor axes are aligned with the mechanical gyro so the x and y output pitch and roll, respectively. (Source: J. Bachiochi, CC268)

Autonomous Mobile Robot (Part 1): Overview & Hardware

Welcome to “Robot Boot Camp.” In this two-part article series, I’ll explain what you can do with a basic mobile machine, a few sensors, and behavioral programming techniques. Behavioral programming provides distinct advantages over other programming techniques. It is independent of any environmental model, and it is more robust in the face of sensor error, and the behaviors can be stacked and run concurrently.

My objectives for my recent robot design were fairly modest. I wanted to build a robot that could cruise on its own, avoid obstacles, escape from inadvertent collisions, and track a light source. I knew that if I could meet such objective other more complex behaviors would be possible (e.g., self-docking on low power). There certainly many commercial robots on the market that could have met my requirements. But I decided that my best bet would be to roll my own. I wanted to keep things simple, and I wanted to fully understand the sensors and controls for behavioral autonomous operation. The TOMBOT is the fruit of that labor (see Photo 1a). A colleague came up with the name TOMBOT in honor of its inventor, and the name kind of stuck.

Photo 1a—The complete TOMBOT design. b—The graphics display is nice feature.

In this series of articles, I’ll present lessons learned and describe the hardware/software design process. The series will detail TOMBOT-style robot hardware and assembly, as well as behavior programming techniques using C code. By the end of the series, I’ll have covered a complete behavior programming library and API, which will be available for experimentation.

DESIGN BASICS

The TOMBOT robot is certainly minimal, no frills: two continuous-rotation, variable-speed control servos; two IR (850 nm) analog distance measurement sensors (4- to 30-cm range); two CdS photoconductive cells with good lux response in visible spectrum; and, finally, a front bumper (switch-activated) for collision detection. The platform is simple: servos and sensors on the left and right side of two level platforms. The bottom platform houses bumper, batteries, and servos. The top platform houses sensors and microcontroller electronics. The back part of the bottom platform uses a central skid for balance between the two servos (see Photo 1).

Given my background as a Microchip Developer and Academic Partner, I used a Microchip Technology PIC32 microcontroller, a PICkit 3 programmer/debugger, and a free Microchip IDE and 32-bit complier for TOMBOT. (Refer to the TOMBOT components list at the end of this article.)

It was a real thrill to design and build a minimal capability robot that can—with stacking programming behaviors—emulate some “intelligence.” TOMBOT is still a work in progress, but I recently had the privilege of demoing it to a first grade class in El Segundo, CA, as part of a Science Technology Engineering and Mathematics (STEM) initiative. The results were very rewarding, but more on that later.

BEHAVIORAL PROGRAMMING

A control system for a completely autonomous mobile robot must perform many complex information-processing tasks in real time, even for simple applications. The traditional method to building control systems for such robots is to separate the problem into a series of sequential functional components. An alternative approach is to use behavioral programming. The technique was introduced by Rodney Brooks out of the MIT Robotics Lab, and it has been very successful in the implementation of a lot of commercial robots, such as the popular Roomba vacuuming. It was even adopted for space applications like NASA’s Mars Rover and military seekers.

Programming a robot according to behavior-based principles makes the program inherently parallel, enabling the robot to attend simultaneously to all hazards it may encounter as well as any serendipitous opportunities that may arise. Each behavior functions independently through sensor registration, perception, and action. In the end, all behavior requests are prioritized and arbitrated before action is taken. By stacking the appropriate behaviors, using arbitrated software techniques, the robot appears to show (broadly speaking) “increasing intelligence.” The TOMBOT modestly achieves this objective using selective compile configurations to emulate a series of robot behaviors (i.e., Cruise, Home, Escape, Avoid, and Low Power). Figure 1 is a simple model illustration of a behavior program.

Figure 1: Behavior program

Joseph Jones’s Robot Programming: A Practical Guide to Behavior-Based Robotics (TAB Electronics, 2003) is a great reference book that helped guide me in this effort. It turns out that Jones was part of the design team for the Roomba product.

Debugging a mobile platform that is executing a series of concurrent behaviors can be daunting task. So, to make things easier, I implemented a complete remote control using a wireless link between the robot and a PC. With this link, I can enable or disable autonomous behavior, retrieve the robot sensor status and mode of operations, and curtail and avoid potential robot hazard. In addition to this, I implemented some additional operator feedback using a small graphics display, LEDs, and a simple sound buzzer. Note the TOMBOT’s power-up display in Photo 1b. We take Robot Boot Camp very seriously.

Minimalist System

As you can see in the robot’s block diagram (see Figure 2), the TOMBOT is very much a minimalist system with just enough components to demonstrate autonomous behaviors: Cruise, Escape, Avoid, and Home. All these behaviors require the use of left and right servos for autonomous maneuverability.

Figure 2: The TOMBOT system

The Cruise behavior just keeps the robot in motion in lieu of any stimulus. The Escape behavior uses the bumper to sense a collision and then 180° spin with reverse. The Avoid behavior makes use of continuous forward-looking IR sensors to veer left or right upon approaching a close obstacle. The Home behavior utilizes the front optical photocells to provide robot self-guidance to a strong light highly directional source. It all should add up to some very distinct “intelligent” operation. Figure 3 depicts the basic sensor and electronic layout.

Figure 3: Basic sensor and electronic layout

TOMBOT Assembly

The TOMBOT uses the low-cost robot platform (ArBot Chassis) and wheel set (X-Wheel assembly) from Budget Robotics (see Figure 4).

Figure 4: The platform and wheel set

A picture is worth a thousand words. Photo 2 shows two views of the TOMBOT prototype.

Photo 2a: The TOMBOT’s Sharp IR sensors, photo assembly, and more. b: The battery pack, right servo, and more.

Photo 2a shows dual Sharp IR sensors. Just below them is the photocell assembly. It is a custom board with dual CdS GL5528 photoconductive cells and 2.2-kΩ current-limiting resistors. Below this is a bumper assembly consisting of two SPDT Snap-action switches with lever (All Electronics Corp. CAT# SMS-196, left and right) fixed to a custom pre-fab plastic front bumper. Also shown is the solderless breakout board and left servo. Photo 2b shows the rechargeable battery pack that resides on the lower base platform and associated power switch. The electronics stack is visible. Here the XBee/Buzzer and graphics card modules residing on the 32-bit Experimenter. The Experimenter is plugged into a custom carrier board that allows for an interconnection to the solderless breakout to the rest of the system. Finally, note that the right servo is highlighted. The total TOMBOT package is not ideal; but remember, I’m talking about a prototype, and this particular configuration has held up nicely in several field demos.

I used Parallax (Futaba) continuous-rotation servos. They use a three-wire connector (+5 V, GND, and Control).

Figure 5 depicts a second-generation bumper assembly.  The same snap-action switches with extended levers are bent and fashioned to interconnect a bumper assembly as shown.

Figure 5: Second-generation bumper assembly

TOMBOT Electronics

A 32-bit Micro Experimenter is used as the CPU. This board is based the high-end Microchip Technology PIC32MX695F512H 64-pin TQFP with 128-KB RAM, 512-KB flash memory, and an 80-MHz clock. I did not want to skimp on this component during the prototype phase. In addition the 32-bit Experimenter supports a 102 × 64 monographic card with green/red backlight controls and LEDs. Since a full graphics library was already bundled with this Experimenter graphics card, it also represented good risk reduction during prototyping phase. Details for both cards are available on the Kiba website.

The Experimenter supports six basic board-level connections to outside world using JP1, JP2, JP3, JP4, BOT, and TOP headers.  A custom carrier board interfaces to the Experimenter via these connections and provides power and signal connection to the sensors and servos. The custom carrier accepts battery voltage and regulates it to +5 VDC. This +5 V is then further regulated by the Experimenter to its native +3.3-VDC operation. The solderless breadboard supports a resistor network to sense a +9-V battery voltage for a +3.3-V PIC processor. The breadboard also contains an LM324 quad op-amp to provide a buffer between +3.3-V logic of the processor and the required +5-V operation of the servo. Figure 6 is a detailed schematic diagram of the electronics.

Figure 6: The design’s circuitry

A custom card for the XBee radio carrier and buzzer was built that plugs into the Experimenter’s TOP and BOT connections. Photo 3 shows the modules and the carrier board. The robot uses a rechargeable 1,600-mAH battery system (typical of mid-range wireless toys) that provides hours of uninterrupted operation.

Photo 3: The modules and the carrier board

PIC32 On-Chip Peripherals

The major PIC32 peripheral connection for the Experimenter to rest of the system is shown. The TOMBOT uses PWM for servo, UART for XBee, SPI and digital for LCD, analog input channels for all the sensors, and digital for the buzzer and bumper detect. The key peripheral connection for the Experimenter to rest of the system is shown in Figure 7.

Figure 7: Peripheral usage

The PIC32 pinouts and their associated Experimenter connections are detailed in Figure 8.

Figure 8: PIC32 peripheral pinouts and EXP32 connectors

The TOMBOT Motion Basics and the PIC32 Output Compare Peripheral

Let’s review the basics for TOMBOT motor control. The servos use the Parallax (Futaba) Continuous Rotation Servos. With two-wheel control, the robot motion is controlled as per Table 1.

Table 1: Robot motion

The servos are controlled by using a 20-ms (500-Hz) pulse PWM pattern where the PWM pulse can from 1.0 ms to 2.0 ms. The effects on the servos for the different PWM are shown in Figure 9.

Figure 9: Servo PWM control

The PIC32 microcontroller (used in the Experimenter) has five Output Compare modules (OCX, where X =1 , 2, 3, 4, 5). We use two of these peripherals, specifically OC3, OC4 to generate the PWM to control the servo speed and direction. The OCX module can use either 16 Timer2 (TMR2) or 16 Timer3 (TMR3) or combined as 32-bit Timer23 as a time base and for period (PR) setting for the output pulse waveform. In our case, we are using Timer23 as a PR set to 20 ms (500 Hz). The OCXRS and OCXR registers are loaded with a 16-bit value to control width of the pulse generated during the output period. This value is compared against the Timer during each period cycle. The OCX output starts high and then when a match occurs OCX logic will generate a low on output. This will be repeated on a cycle-by-cycle basis (see Figure 10).

Figure 10: PWM generation

Next Comes Software

We set the research goals and objectives for our autonomous robot. We covered the hardware associated with this robot and in the next installment we will describe the software and operation.

Tom Kibalo holds a BSEE from City College of New York and an MSEE from the University of Maryland. He as 39 years of engineering experience with a number of companies in the Washington, DC area. Tom is an adjunct EE facility member for local community college, and he is president of Kibacorp, a Microchip Design Partner.